6 square sprinkler can also play a role in cleaning in addition to the traffic environment

Actually, the 6-party sprinkler is part of a multi-functional sweeper, so in many cases, even if it is railroad traffic and some other environments, such as construction sites, etc., it is inseparable from the 6-way sprinkler . Directional cleaning.

Therefore, after analyzing the system, the 6-way sprinkler could have more special effects and properties besides the good cleaning effect for highway traffic. First of all, in areas where the construction site is relatively complicated, such places as these places are often heavily polluted with dust and dust particles in the air. So often in these areas, haze is also very serious, so it can not be separated from the 6 party sprinkler. The six-way sprinklers first had fixed brackets in these zones, so that regardless of whether the road surface was flat or sloped, the six-way sprinklers could stand on the ground smoothly after the fixing brackets were lifted.

In the process of work, the 6-party sprinkler adopts the principle of air flow, first absorbing some negative substances in the air into the dust collection system inside the vehicle body. In this process, the dust collection system and the dust recovery system can fully envelope the dust and the airborne contaminants in the dust box through the filter grid, so that secondary pollution will not be formed.

In addition, the 6-way sprinkler can also realize remote transport of water resources on the construction site. Moreover, on the road surface of the railway, some freight trains are often trains that pull coal, so the surrounding air is often full of haze, and the particles in the air caused by coal are also quite serious. In this case, the 6-way sprinkler can first fully output the effective signal frequency through the photoelectric system. Under this circumstance, it is possible to carry out system orthogonality and information interaction with the trains of the train. All these are intelligent service modes. Therefore, this replaces the manual operation mode of ordinary cleaning vehicles in the past.

When the six-sided sprinkler 's operating dashboard shows which train compartment needs to be cleaned in all directions, this time the 6-party sprinkler will come to the front of one of the cars to solidify the coal. At this time, the Six Party Sprinkler will fully spray the water mist so that the coal in the air contains impurities and fix it, and land on the ground and then rotate 360 ​​degrees, and through the cleaning of the fan area, let some of the ground Coal and impurity dust are fully absorbed within the architecture of the six-way sprinkler. However, what needs to be known here is that during the process of using the six-way sprinkler, maintenance and maintenance are required at every other stage. Because the filtration system, in particular, some orthogonal systems, etc., require constant maintenance and maintenance, the service life and cycle can be increased.

Clad Plate

HP Wear Resistant Group offers the various products of wear plates namely Chromium Carbide Wear Plate, Chromium Carbide Overlay Steel,Smooth Surface CCO plate, Heat Treated Wear Plates (AR Plate or Q&T Steel), Casting Plates, Tungsten Carbide Coated Plates in various grade and multiple size options.

HP Clad Plate is kind of Abrasion Resistant Steel Plate consisting of mild steel as base and Chromium Carbide Overlayer. This grade Wear Plate is widely applied to the various fileds as the best Wear Solution.

Chromium Carbide Wear Plate, Abrasion Resistant Steel Plate, Chromium Carbide Overlay Steel, Clad Plate, Wear Plate

HuiFeng Wear Resistant Group , https://www.hpwearsolution.com