Areed Electric Tape 16mm Feeder for Hanwha (Samsung) Mounter Machine

1.ARD-HANWHA-feeder can apply recieving power through probe easily and can also avoid the wiring trouble.It works compatibly with the original HANWHA feeder,no need to remove the feeder during loading bulk materials, the circle line's efficiency can be increased 5 times or more.




2.AREED electric feeder has a wide range of the optional size for electronic components,compatible with two packaging of the PC tape and paper tape, demand based switching between 2mm and 4mm.One set ARD-HANWHA-08 feeder has been instead of the original three ones.The key controller board has the gear shift function, Y axis fine tuning function, alarming or the abnormal using, forward and backward function,and the Digital display screen is beautiful appearance and practical.




3.Right top stripping with a built-in storage room, as well as the removable type of hanging material to realize the true non-stop re-loading function.The independent working motor is equipped with the coil system of metal meshing gear. The sensor reports the troubles when the rods do not work ,and the feeder's red light flashes warning an error occurred. 




4.Using Stepper motor instead of the traditional cylinder driving mode, the speed and precision of feeding highly increased, and the average effective life of the whole machine prolongs five years or more.Double-fisted safety cut-off switch can avoid the overload burning of the circuits,as well as the crash malfunction caused by the operation of the feeder when it's not fixed well. 

Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories are less expensive than other manufacturing processes.

Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories have good thermal properties and are used in applications where high temperature power supplies and bulbs are used. In former years, lighting housings were welded together, which was labor intensive, costly, and had limitations on the shapes available.

Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories can be many shapes and sizes, used in many lighting applications, and can be manufactured net shape. Aluminum weighs 1/3 of a comparable steel part. The Aluminum Parts would cost less to ship due to the weight. Aluminum lighting fixtures can be produced in quantities of a few hundred to thousands of aluminum lighting fixtures each day. Aluminum Die Casting Lighting Parts | Lamp Parts | Lamp Accessories are electrically conductive and can be grounded.

Aluminum Die Casting Lighting Parts

Aluminum Die Casting of Lighting Parts, Aluminum Die Casting of Lamp parts, Aluminum Castings of LED, Aluminum Casting of CNC Machining

NINGBO ZHENHAI BOLANG METAL PRODUCT FACTORY , https://www.bldiecasting.com