Precipitated Calcium Carbonate
Uses: Can be used as filler in rubber, plastics, paper, paint and ink industries. Widely used in organic synthesis, metallurgy, glass and asbestos production. It can also be used as a medium seeding agent for industrial waste water, a antacid for stomach and duodenal ulcers, a detoxifying agent for acidosis, a SOâ‚‚ eliminating agent in SOâ‚‚-containing exhaust gas, a dairy cattle feed additive and an anti-sticking agent for oil felt . It can also be used as a raw material for tooth powder, toothpaste and other cosmetics.
Usually used as a filler, widely used in daily chemical industries such as artificial floor tiles, rubber, plastics, papermaking, coatings, paints, inks, cables, construction supplies, food, medicine, textiles, feed, toothpaste, etc., as a filler to increase products The volume is reduced, and the production cost is reduced. Precipitated Calcium Carbonate,Precipitate Calcium Carbonated Powder,Precipitated Calcium Carbonate Manufacturers,Activated Precipitated Calcium Carbonate Henan Shunbang Chemical Industry CO.,Ltd , https://www.pvcresinchem.com
Ship launching airbags are to be constructed of a cylindrical body and two conical heads (one at each end). Ship launching airbags with lots of advantages, such as easy to operate, time saving, saving investment safety, etc.
Major Strengths of Ship Launching Airbags:
High level of safety: Equipped with a reliable safety valve, our airbags can stand the maximum pressure up to 4 times that of the operating pressure.
Good air tightness: Pressure decreases less than 10% for a period of 24 hours.
Long lifespan: It is guaranteed that our airbags can sustain their designed operating pressure for 3 years.
Specification
1. Structure
2. Diameters: 0.8 m - 2.0 m or customized.
3. Length: 6 m - 20 m or customized.
4. Loading Capacity: about 10 T/M to 40 T/M.
5. Grades:
Ordinary airbags - 3, 4 or 5 layers of synthetic-tire-cord.
High bearing capacity airbags - 6, 7 or 8 synthetic-tire-cord.
Super high bearing capacity airbags - 9, 10 or more layers of synthetic-tire-cord.
6. Accessories: Pull ring, iron airlock, tee joint, pressure gauge, ball valve, hose joint etc.
7. Technical Data of Ship Launching Airbags
Model
Diameter
(m)Initial pressure
(KPa)Rated working pressure,
Pe (KPa)Bearing capacity (kN/m)
Minimum burst pressure (KPa)
QP3
0.8
25
130
114
390
1.0
18
100
110
300
1.2
15
85
112
260
1.5
13
70
115
210
QP4
0.8
35
170
149
510
1.0
25
130
143
390
1.2
20
110
145
330
1.5
16
90
148
270
1.8
14
80
158
240
QP5
0.8
48
210
184
630
1.0
35
170
186
510
1.2
28
140
185
420
1.5
20
110
181
330
1.8
16
90
178
270
QP6
1.0
45
200
219
600
1.2
32
165
217
490
1.5
25
130
215
390
1.8
20
110
218
330
Note:
1. Rated working pressure:±5%.
2. Compress deformation: ±2%.
3. Bearing capacity: one meter airbag at a deformation rate of 70%, internal pressure equivalent to the rated pressure value of Pe.
9. Rubber Material Test:
No.
Test item
Required value
Test method
1
Tensile Strength, MPa
≥ 18
ISO37
2
Elongation at break, %
≥ 400
ISO37
3
Hardness, shore A
60±10
ISO7619-1
4
Tear Strength N/cm
≥ 400
ISO34-1
5
Compression set, % (70 ºC ± 1 ºC, 22 h)
≤ 30
ISO815-1
6
After thermal aging at
(70 ºC, ±1 ºC, 96 h)Holding of pull lengthening,%
≥ 80
ISO188
7
Holding of elongation at break,%
≥ 80
ISO188
8
Change of hardness, hardness
≤ 8
ISO7619-1
9
Static ozone aging at 40 ºC*96 h,
{ozone concentration( 50±5)*10}No crack
ISO1431-1
10. Reinforcing Material: the warp should be (90±5) cord per 100 mm in width, and the breaking strength shall be more than 205 N per cord.
Â
11. Appearance: The appearance of an air bag shall be smooth, glossy and without blemish such as crack, blister, delamination pits or impurities.
Â
12. Dimensional Tolerances:
The length and diameter of an airbag shall be measured with the rated working pressure and be within ±3%.
Â
13. Ship Launching Airbags Performance:
D
(M)(4-5 layers)
(6-8 layers)
Â
Initial pressure
(MPa)Working pressure
(MPa)Initial pressure
(MPa)Working pressure
(MPa)Â
Â
1.0
0.14 - 0.16
0.12 - 0.14
0.22 - 0.26
0.20 - 0.24
Â
1.2
0.12 - 0.14
0.10 - 0.12
0.20 - 0.24
0.17 - 0.22
Â
1.5
0.10 - 0.12
0.08 - 0.10
0.15 - 0.20
0.13 - 0.18
Â
1.8
0.08 - 0.10
0.07 - 0.09
0.13 - 0.16
0.11 - 0.14
Â
2.0
0.07 - 0.09
0.06 - 0.08
0.12 - 0.15
0.10 - 0.13
Â
Â
Light Calcium Carbonate is made of limestone, and can be used in daily chemical products such as tooth powder, toothpaste, cosmetics, etc. It can also be used in organic synthesis, metallurgy, glass and asbestos production.
The particle size of light calcium is smaller than that of Heavy Calcium Carbonate, the oil absorption is larger than that of heavy calcium carbonate, and the price is higher than that of heavy calcium carbonate. They are all commonly used fillers in latex paint, and they are best used together. Light calcium is better in terms of sedimentation, but its oil absorption is greater than that of heavy calcium, and the price is generally more expensive than heavy calcium. Although it is not as stable as heavy calcium, it is stable. Even for exterior wall paint, its application amount is also very large. of.
Good Gas Keeping Marine Airbags for Ship Launching
Diameter: 0.8m-2.0m
Length: 5.0m-18m
Layers: 4-10
Characteristic: Anti-Explosion, Flexible, High Bearing Capacity,
Warranty: 24 Months
Working Age: More Than 10 Years
Trademark: DACHENG
Transport Package: Natural Rubber & Synthetic Cord Layer
Specification: as drawings
Origin: China
HS Code: 4016950090
Introduction