High Pressure Fiberglass Pipe and Fitting

Model NO.: DN15-3000MM
Cross-Section Shape: Round or Square or Customized
Connection Type: Bell Socket / Flanged / Plain End
Design Temperature: -40-2000 Degree
Stiffness: 2500, 5000, 7500, 10000, 20000,or Required
Length: 3-12m
Molding Method: Filament Winding / Hand Lay-up
Trademark: ZHONGYI
Transport Package: Seaworthy or Customized
Specification: PN0.1-2.5Mpa
Origin: China
HS Code: 39172900
Model NO.: DN15-3000MM
Cross-Section Shape: Round or Square or Customized
Connection Type: Bell Socket / Flanged / Plain End
Design Temperature: -40-2000 Degree
Stiffness: 2500, 5000, 7500, 10000, 20000,or Required
Length: 3-12m
Molding Method: Filament Winding / Hand Lay-up
Trademark: ZHONGYI
Transport Package: Seaworthy or Customized
Specification: PN0.1-2.5Mpa
Origin: China
HS Code: 39172900
High Pressure GRP Fiberglass Composite FRP Pipe and Fitting

The Filament Winding Potable Water FRP Pipe takes thermosetting resin as base body, take glass fibre and its products as reinforced material.The process of adding silicon sand will adopts the pheumatic control.In addition ,the high frequency vibrator will be used to densify the silicon sand-adding layer,which can large improve the compactness of the silicon sand-adding layer ,as a result,the ring stiffness of pipe will be also improved effectively and at same time,the phenomenon of dry yarn or no yarn will not exist .The usage of silicon sand-adding device and process can not only improve the quality of pipe a lot but also decrease the cost. Under such case,the products will be strongly competitive in the market.

High Pressure Fiberglass Pipe and Fitting
High Pressure Fiberglass Pipe and Fitting
High Pressure Fiberglass Pipe and Fitting
High Pressure Fiberglass Pipe and Fitting
High Pressure Fiberglass Pipe and Fitting
High Pressure Fiberglass Pipe and Fitting



Typical Dimensions:
DN L 0.6MPa 1.0MPa 1.6MPa
( mm ) ( mm ) TH ( mm ) TH ( mm ) TH ( mm )
10 1800 4.6 4.6 4.6
15 1800 4.6 4.6 4.6
20 1800 4.6 4.6 4.6
25 1800 4.6 4.6 4.6
32 1800 4.6 4.6 4.6
40 6000 4.6 4.6 4.6
50 6000 4.6 4.6 4.6
65 6000 4.6 4.6 4.6
80 6000 4.6 4.6 4.6
100 6000 4.6 4.6 4.6
125 6000 4.6 4.6 4.6
150 6000 4.6 4.6 4.6
200 12000 4.6 5 . 9 5.1
250 12000 4.8 5 . 9 5.7
300 12000 4.9 5 6.4
350 12000 4.9 5.1 7.5
400 12000 4.9 5.8 8.2
450 12000 5.3 6.2 8.9
500 12000 5.4 6.7 10
600 12000 6.3 7.6 11.3
700 12000 6.7 9.1 13.1
800 12000 7.2 10 14.6
900 12000 8.2 10.9 16.4
1000 12000 9.1 11.8 17.7
1200 12000 10 13 19
1400 12000 11.3 14.6 21.5
1500 12000 12.2 15.6 23
1600 12000 13.1 16.6 24.5
1800 12000 14 18.5 27.2
2000 12000 15.8 20.5 29.8
2100 12000 17.6 21 31.1
2200 12000 19.5 22 32.4
2400 12000 20.5 24 35.5
2600 12000 22.7 26.5 38
3000 12000 28 32.5 44.2
3200 12000 31 36 47.5
3600 12000 33 39.5 52.4
4000 12000 34.5 45.3 57.8
       



Engineering Mechanics Index of FRP/Composite Material (1)
1,Pipe  
Hoop tensile strength 200~300MPa
Longitudinal tensile strength 50~100MPa
Longitudinal flexural strength 140MPa
Interlaminar shear strength 50MPa
Crosslaminar shear strength 60MPa
Hoop modulus of elasticity 25GPa
Longitudinal modulus of elasticity 12.5GPa
Shear modulus of elasticity 7GPa
flexural  E--modulus 9.3GPa
2,Fitting  
Tensile strength 120-290MPa
Flexural strength 210-410MPa
Compression strength 130MPa
Tensile modulus of elasticity 9.5GPa
Flexural  E--modulus 9.0GPa
Remarks: The data in the table is the typical data

FAQ
 
Q:Are you a trading company or a manufacture factory?
A: Our factory is one of the biggest FRP products, FRP manufacturer in china.

Q: How about after-sales service?
A: 3 year free warranty, Lifetime technical service support.

Q: How can i install the production line and get a commissiong?
A: We may send our engineer for installation and commissioning, but relevant cost will be paid by you.

We are looking forward to cooperate with you! If you are interested, kindly feel free to contact us!



  High Pressure GRP Fiberglass Composite FRP Pipe and Fitting

The Filament Winding Potable Water FRP Pipe takes thermosetting resin as base body, take glass fibre and its products as reinforced material.The process of adding silicon sand will adopts the pheumatic control.In addition ,the high frequency vibrator will be used to densify the silicon sand-adding layer,which can large improve the compactness of the silicon sand-adding layer ,as a result,the ring stiffness of pipe will be also improved effectively and at same time,the phenomenon of dry yarn or no yarn will not exist .The usage of silicon sand-adding device and process can not only improve the quality of pipe a lot but also decrease the cost. Under such case,the products will be strongly competitive in the market.

High Pressure Fiberglass Pipe and Fitting
High Pressure Fiberglass Pipe and Fitting
High Pressure Fiberglass Pipe and Fitting
High Pressure Fiberglass Pipe and Fitting
High Pressure Fiberglass Pipe and Fitting
High Pressure Fiberglass Pipe and Fitting



Typical Dimensions:

Truck Mounted Water Well Drilling Rig

Truck Mounted Well Drilling Rigs,Truck Mounted Water Well Drill,Truck Mounted Water Well Drilling Rigs,Truck Mounted Well Drilling Rig

Taian Longye Import And Export Trade Co.,ltd , https://www.longyedrillingrig.com

DN L 0.6MPa 1.0MPa 1.6MPa
( mm ) ( mm ) TH ( mm ) TH ( mm ) TH ( mm )
10 1800 4.6 4.6 4.6
15 1800 4.6 4.6 4.6
20 1800 4.6 4.6 4.6
25 1800 4.6 4.6 4.6
32 1800 4.6 4.6 4.6
40 6000 4.6 4.6 4.6
50 6000 4.6 4.6 4.6
65 6000 4.6 4.6 4.6
80 6000 4.6 4.6 4.6
100 6000 4.6 4.6 4.6
125 6000 4.6 4.6 4.6
150 6000 4.6 4.6 4.6
200 12000 4.6 5 . 9 5.1