How to install the wing gate to meet customer requirements, Hing Shunan specializing in the production of wing manufacturers and your analysis, learn from each other, mutual benefit and win-win, and ultimately get the most critical customer recognition.
How to install a wing gate before it is qualified
1. Dimensions: First of all, according to customer requirements, we must communicate with customers before placing orders. Technical requirements must be communicated well with customers. Avoid mistakes. According to the requirements of customers, the width of the site, and the installation of several passage wings, must be considered clearly. How many people come in and out, generally the width of the wing gate is 550-600mm, and the width of the chassis is 300mm. For example, a 2-channel wing gate is installed. The first two-way wing gate is generally composed of two single wing wing gates and one double wing wing gate. Is 3 machines, each machine width 300, 3 sets of width is 900mm, channel width in accordance with the 600 count, then the normal to 2100mm width can be put down, wide, and more part of the plus guardrail, less is difficult to install Go on.
2. Cabling: Customers should take the open line or the dark line. This is the key to communication with customers. Take the dark line, and each channel should take 2 6-8 points PVC pipe, one dedicated to go strong, that is, 220V power supply, and the other to take away the weak electricity. Both the machine line and the network cable will be inside this tube. In general, the line cannot be too long, and the longer the communication is, the worse it will be.
3. Fixed: Xingshun'an wing gates are marked every time they leave the factory and are placed in strict accordance with the factory order. No order may be reversed. According to the original direction, the direction of entry and exit to be fixed, the ground should be smooth, uneven, must adjust or re-do the foundation. The vertical direction should also be parallel to it. Otherwise, the machine will not be alerted to the shooter. Each machine has 4 expansion bolts fixed. It must be loose and reliable.
4. Registration: When there are multiple channels, it is recommended to use a switch. The number of channels must not be less than the number of switches. That is, a minimum of 4 or 8 switches should be selected for a 3-lane wing gate, networking, software download, and a back-end management system. The card, make a mark, keep the registered information, so that after the bulk import, according to the software background step by step operation, the card-issuing device and the CD must be kept, so as not to be added next time can not find, look at the instructions, and more exploration, do not Call the manufacturer at every turn, but our company also has technical guidance.
5. Test machine: the machine is also the key to debugging, check whether the machine is plugged in, whether there is loosening, swipe card registration is successful, each channel to card testing.
Acceptance and acceptance can be considered by the customer. When installing, it is necessary to coordinate with the customer. Each customer's requirement is not the same, but the general principle of installation will not change. Having mastered the above installation steps is very necessary for the engineering company. The project, there are technical problems at any time to contact our company, the company will have someone to answer for you, you can also consult Mr. Cheng 13430409598 telephone, complaints and so on.
Forged Flange
Forged flange
There are many different types of Forged flanges, such as weld neck flange, Plate Flange, slip on flange, Blind Flange, socket weld flange, Threaded Flange, spectacle flange (sometimes it is called figure-8 blind flange), lap joint flange and so on.
Main materials are carbon steel, alloy steel and stainless steel. For carbon steel, ASTM A105 & A105N are required by most project.304/304L,316/316L,321,etc belong to stainless steel flange. The sealing face of forged flanges in common use is raised face(RF), flat face(FF) and ring type joint(RTJ). As one of largest flange suppliers in China, we commit ourselves to providing best quality and delivery time.
