CNC flame cutting machine has been in China for more than 10 years, and it is widely used in the market. With the improvement of CNC flame cutting machine technology, the internal structure of the CNC flame cutting machine is becoming more and more complex, which makes maintenance personnel must have high experience and technology, while being able to rapidly discharge the various conditions of the CNC flame cutting machine. Many CNC flame cutting machine maintenance personnel will become helpless in the event of a failure, do not know how to start. Today, share with you, how to quickly analyze the experience of the common faults of CNC flame cutting machine. Convex Shaped Magnet,Ndfeb Shaped Magnet,Tile Arc Shaped Magnet,A Horseshoe Magnet Dongguan Zhenglong Magnet Co., Ltd , http://www.zlkjmagnetism.com
When a problem occurs in the CNC flame cutting machine, maintenance personnel should follow the principle of maintenance:
First, after the first observation hands-on:
When the NC flame cutting machine fails, we can first look at the diagnostic information that the cutting machine's own diagnostic function prompts, so that we can narrow the detection range, and soon we know that the fault area is there, and then we apply the right medicine. We should not try to solve problems when the cutting machine fails, because we sometimes experience misleading us. Of course only, sometimes the information for fault diagnosis is not entirely trustworthy.
Second, from outside to inside, from shallow to deep:
Why should we emphasize the principles from the outside to the inside, from shallow to deep? Quotations Many times CNC flame cutters come from external components because they are greatly affected by external factors. For example: aging lines, excessive dust, poor lubrication, machine collisions, environmental temperature and humidity effects, etc. When there is no fault in the external inspection, we can begin to check internal factors. Therefore, in the course of maintenance, we follow the principles from the outside to the inside, from the human to the system, and from the shallow to the deep. This can greatly shorten the maintenance time of the equipment and can also reduce the detours.
Third, make full use of various resources:
When the automatic diagnosis function of our CNC flame cutting machine gives prompt information, we can analyze and check the PC graph. Although it is convenient to look up the fault point from a PC diagram, in fact, if the CNC flame cutting machine does not understand its internal operating principle and working procedures, it is no good. Therefore, this requires our maintenance personnel to constantly accumulate experience in the normal maintenance process.
All in all, when the NC flame cutting machine fails, we must open the train of thought as soon as possible - enter the state - reduce the scope of detection - to solve the problem, reduce equipment downtime, the company's losses to a minimum.
Chinese cutting machine trading network, allowing you to buy the rest assured! A variety of CNC cutting machine and CNC cutting equipment, a variety of cutting machine models, let the optional! Official website: /