Iron and steel enterprises before the furnace analysis of laboratory equipment, casting equipment selection

For iron and steel enterprises, the equipment and instruments used in the furnace analysis laboratory should be selected according to the characteristics and conditions of the foundry company. The commonly used equipment is sanitary, electric power and heating equipment. Commonly used instruments are laboratory instruments and elemental analysis instruments.

Hygienic equipment includes ventilation and up and down water. There are two forms of ventilation, air intake and exhaust. The intake air is fresh air input into the room outdoors. The exhaust air is exhausted from the room to the outside. Commonly used equipment are ventilators, exhaust fans and fume hoods. The upper and lower waters are connected by a separate pipe to the tap water network. Power equipment includes transformers, switchboards, AC circuits and DC circuits. Heating equipment using steam pipes or electric heaters.

There is a wide variety of instruments used in the forehearth laboratory of iron and steel foundry companies. The design should be based on the project to be carried out and the analysis and test methods adopted. Commonly used instruments are: 1 glass instruments, such as beakers, volumetric flasks, drop tubes, etc. 2 heating equipment, such as electric furnace, muffle furnace, water bath and so on. 3 ordinary instruments, such as balance purified water preparation. 4 large-scale precision instruments, such as atomic absorption spectrometers, mass spectrometers, chromatographs, etc. 5Special instruments, such as fixed sulfur analyzer for steel analysis, and gel layer coefficient analyzer for coal analysis.

It should be noted that when designing a laboratory, a foundry company should advance laboratory laboratory equipment and instrument names, specifications, models, and quantities so that more effective and reasonable choices can be made as planned.