Multifunctional Drawn Arc Stud Welding Machinery

Model NO.: DCD2400A
Frequency: 50-60Hz
Maximum Power: 120kVA
Stud Welding Range: M5-M25
Fuses: 10A
Degree of Protection: IP22
Current: Alternating Current
Model: Dcd2400A
Trademark: Mengzhijie
Specification: ISO9001: 2008
Origin: Zhangjiagang, Jiangsu
HS Code: 85153900
Model NO.: DCD2400A
Frequency: 50-60Hz
Maximum Power: 120kVA
Stud Welding Range: M5-M25
Fuses: 10A
Degree of Protection: IP22
Current: Alternating Current
Model: Dcd2400A
Trademark: Mengzhijie
Specification: ISO9001: 2008
Origin: Zhangjiagang, Jiangsu
HS Code: 85153900
Multifunctional Drawn Arc Stud Welding Machinery

Multifunctional welding machine has the following characteristics:
1. Multifunctional stud welding machine has two sets of parallel or separated principle stud welding machines, not only can achieve small current welding, but also high current welding. This kind welding machine has a wide welding range, covering almost all the size of welding studs in the market, and the welding efficiency is extremely clear.
2. When separated, if one of the welder fails when construction, another welder can use as usual, so that can win valuable time for the production. In inspection and repair, circuit boards can be interchanged, so that can determine the point of failure timely. Easy to repair, do not affect the production. When in parallel, welding power doubled, can be used to weld pins with large sizes.
3. Since there are 4 grounding wires in a set of multifunctional welding machine, uniformly distributed to the workpieces, effectively eliminate magnetic blow and make the seam of the welding studs more full round.
4. Parallel multifunctional welding machines are equivalent to a set of high-power stud welding machine, and separated multifunctional welding machines are equivalent to two sets of small power stud welding machines.
5. Two small stud welding machines with a chassis have low cost and light weight. The price is 75% of two sets of small power stud welding machines. That means 25% cost is saved.
6. DCD series of stud welding machines are mature products. After years of actual use, the failure rate is very low and the lifetime is up to one million times. Used in conjunction with high-tech products AJLH-III-type stud welding gun. A combined welding gun, can be used to weld various specifications of studs from 5 mm to 36 mm. High welding pass rate, easy to use.
Power Specs
Power Supply Model DCD2400A
Input Voltage Three-phase 380VAC±10% Frequency 50-60HZ
Output Voltage 45-90V Welding speed 5-30pcs / min
Rated current of single DC1200A 63A Single Output Current 200A-1200A(five files)
Welding range of Separated machine 3mm-14mm Single Maximum Power 60KVA
Rated current of parallel  machine DC2400A 120A And to machine output current 400A-2400A(ten files)
Welding range of parallel  machine 5mm-25mm Maximum power And to machine 120KVA
Welding time 20-1500ms Cooling System Fan
Transformer protection H Protection class IP22
Weight KG Dimensions(mm)  
 
Settings of DC1200-type Drawn Arc Welding Gun (Separated machine)
Welding  method Stud diameter Power Settings Extended length(mm) Mention stretch height(mm) Time
Gas protection M3 1 2.5 1.5 0.1
Gas protection M4 1 2.5 1.5 0.15
Gas protection M5 1 2.5 1.5 0.2
Gas protection 1 2.5 1.5 0.25
Gas protection M6 1 2.5 1.5 0.25
Gas protection 2 2.5 1.5 0.2
Porcelain Biosphere M8 2 3.0 1.5 0.3
Gas protection 3 3.0 1.5 0.25
Porcelain Biosphere M10 3 4.0 1.5 0.4
Gas protection 4 4.0 1.5 0.3
Porcelain Biosphere M12 4 4.5 1.5 0.45
Gas protection 5 4.5 1.5 0.4
Multifunctional Drawn Arc Stud Welding Machinery

Multifunctional welding machine has the following characteristics:
1. Multifunctional stud welding machine has two sets of parallel or separated principle stud welding machines, not only can achieve small current welding, but also high current welding. This kind welding machine has a wide welding range, covering almost all the size of welding studs in the market, and the welding efficiency is extremely clear.
2. When separated, if one of the welder fails when construction, another welder can use as usual, so that can win valuable time for the production. In inspection and repair, circuit boards can be interchanged, so that can determine the point of failure timely. Easy to repair, do not affect the production. When in parallel, welding power doubled, can be used to weld pins with large sizes.
3. Since there are 4 grounding wires in a set of multifunctional welding machine, uniformly distributed to the workpieces, effectively eliminate magnetic blow and make the seam of the welding studs more full round.
4. Parallel multifunctional welding machines are equivalent to a set of high-power stud welding machine, and separated multifunctional welding machines are equivalent to two sets of small power stud welding machines.
5. Two small stud welding machines with a chassis have low cost and light weight. The price is 75% of two sets of small power stud welding machines. That means 25% cost is saved.
6. DCD series of stud welding machines are mature products. After years of actual use, the failure rate is very low and the lifetime is up to one million times. Used in conjunction with high-tech products AJLH-III-type stud welding gun. A combined welding gun, can be used to weld various specifications of studs from 5 mm to 36 mm. High welding pass rate, easy to use.
Power Specs
Power Supply Model DCD2400A
Input Voltage Three-phase 380VAC±10% Frequency 50-60HZ
Output Voltage 45-90V Welding speed 5-30pcs / min
Rated current of single DC1200A 63A Single Output Current 200A-1200A(five files)
Welding range of Separated machine 3mm-14mm Single Maximum Power 60KVA
Rated current of parallel  machine DC2400A 120A And to machine output current 400A-2400A(ten files)
Welding range of parallel  machine 5mm-25mm Maximum power And to machine 120KVA
Welding time 20-1500ms Cooling System Fan
Transformer protection H Protection class IP22
Weight KG Dimensions(mm)  
 
Settings of DC1200-type Drawn Arc Welding Gun (Separated machine)
Welding  method Stud diameter Power Settings Extended length(mm) Mention stretch height(mm) Time
Gas protection M3 1 2.5 1.5 0.1
Gas protection M4 1 2.5 1.5 0.15
Gas protection M5 1 2.5 1.5 0.2
Gas protection 1 2.5 1.5 0.25
Gas protection M6 1 2.5 1.5 0.25
Gas protection 2 2.5 1.5 0.2
Porcelain Biosphere M8 2 3.0 1.5 0.3
Gas protection 3 3.0 1.5 0.25
Porcelain Biosphere M10 3 4.0 1.5 0.4
Gas protection 4 4.0 1.5 0.3
Porcelain Biosphere M12 4 4.5 1.5 0.45
Gas protection 5 4.5 1.5 0.4

Juice Tea Hot Filling Machine

This juice tea hot Filling Machine has washing,filling,capping three functions in one body,total process is automatic.

Complete Juice production line:

1. PET Bottle Blowing Machine

2. Water treatment system

3. Juice mixing system

4. Juice filling machine

5. Spray sterilization

6. Blow dryer

7. Label sticker machine

8.Shrink packing machine

9. CIP system


Hot Filling Machine,Juice Production Line,Juice Filling Machine,Automatic Liquid Filling Machine

WENZHOU WINIBER MACHINERY EQUIPMENT CO., LTD. , https://www.winibermachinery.com