Multistage Centrifugal High Pressure Water Boosting Pump

CDLKF Immersion Multi-stage Centrifugal Pump

Application
CDLKF is used for conveying cooling liquid, lubricating liquid and condensation water of machine tools, industrial cleaning equipment or other cases that application of immerged pump is suitable, and is applicable to various temperature, flow and pressure ranges. CDLKF is applicable to low-corrosive liquid.

Concretely, it is applicable to electric spark., lathe, grinding machine, processing center, cooling devices, industrial cleaning equipment, filtering system etc.

Operation conditions
Thin, clean non-explosive liquid without solid grains and fibers; Can be used for conveying of water, cooling water solution and cutting lubricating liquid.
Liquid temperature: Normal temperature type: -15° C~+70° C
Warm water type +70° C~120° C

Pump
CDLKF is non-self priming multi-stage centrifugal pump installed with standard motor. The motor shaft is directly connected with the pump shaft through
Coupling. According to the requirement, the pump can be equipped with intelligent protector, which effectively protects pump from dry rotation, phase lack, overload etc. In order to meet the requirement of installation depth of the water tank or vessel, it is possible to install cavity body for changing length of the pump. Length for different number of stages is shown in the dimensions & weight table and the table of products supplying scope.
Motor

The motor is fully-sealed, air cooling standard motor 2 poles
Protection class: IP55
Insulation class: F
Standard voltage, 50Hz: 1× 220-230/240V
3× 200/346V
3× 220-240/380-415V
3× 220-225/380-440V
Standard voltage, 60Hz: 3× 200-230/346-400V
3× 220-255/380-440V
3× 220-277/380-480V
Motors for other voltages can be supplied according to the requirement.
Single phase motors with 0.37~2.2KW are available.

CDLKF Immersion Multi-stage Centrifugal Pump

Application
CDLKF is used for conveying cooling liquid, lubricating liquid and condensation water of machine tools, industrial cleaning equipment or other cases that application of immerged pump is suitable, and is applicable to various temperature, flow and pressure ranges. CDLKF is applicable to low-corrosive liquid.

Concretely, it is applicable to electric spark., lathe, grinding machine, processing center, cooling devices, industrial cleaning equipment, filtering system etc.

Operation conditions
Thin, clean non-explosive liquid without solid grains and fibers; Can be used for conveying of water, cooling water solution and cutting lubricating liquid.
Liquid temperature: Normal temperature type: -15° C~+70° C
Warm water type +70° C~120° C

Pump
CDLKF is non-self priming multi-stage centrifugal pump installed with standard motor. The motor shaft is directly connected with the pump shaft through
Coupling. According to the requirement, the pump can be equipped with intelligent protector, which effectively protects pump from dry rotation, phase lack, overload etc. In order to meet the requirement of installation depth of the water tank or vessel, it is possible to install cavity body for changing length of the pump. Length for different number of stages is shown in the dimensions & weight table and the table of products supplying scope.
Motor

The motor is fully-sealed, air cooling standard motor 2 poles
Protection class: IP55
Insulation class: F
Standard voltage, 50Hz: 1× 220-230/240V
3× 200/346V
3× 220-240/380-415V
3× 220-225/380-440V
Standard voltage, 60Hz: 3× 200-230/346-400V
3× 220-255/380-440V
3× 220-277/380-480V
Motors for other voltages can be supplied according to the requirement.
Single phase motors with 0.37~2.2KW are available.