Easy operation macaron printer with edible ink was manufactured as a homemade printer with economic print head, it is customized for entry-level customers and coffee shops. Easy operation, high printing speed and low cost will attract more clients to come. It will creat more value for you.
5-35º
Macaron Printer,Marcaron Printer Machine,Portable Macaron Printer,Stylish Macaron Printer Shenzhen Refinecolor Technology Co., LTD. , https://www.szfoodprinter.com
Name
Macaron printer
Print head
DX5
Print size
21*38cm
Print color
CMYK+LC LM
Print speed
A4 photo/163s
Printing resolution
5760*1440dpi
Nozzles
90*6=540
Interface
USB 2.0
Net weight/Gross weight
35kg/42kg
Printer size
57*48*44cm
Height adjustment
Handle/Automatic
Working power
110-220 50-60Hz 30W
Operation system
Windows 2000/XP/WIN7/Vista etc.
Temperature
Piston air compressor use precautions
The advantages of the piston air compressor are simple structure, long service life, and easy realization of large capacity and high voltage output. The disadvantage is that the vibration is large, the noise is large, and because the exhaust gas is intermittent, the output is pulsed, and a gas tank is required. What should I pay attention to when using an air compressor? The following Linked Hardware Wholesale City summarizes the following items:
Operating specifications:
1. Air compressor lubricating oil generally has high oil quality and contains oxidizing agent. It is not easy to oxidize and deteriorate, it is not easy to foam, and the residual carbon content is high. The flash point is ideal. Due to the wide variety, common Commonly used are:
a 13" compressor oil (winter oil)
b 19" compressor oil (summer oil)
2, please keep the oil surface in the red circle in the middle of the oil mirror. If you add too much oil, you will waste the lubricating oil, and it will make the gas valve carbon. If you add too little oil, it will often cause poor lubrication, which will cause it to burn or wear. Should be kept in the red circle at any time.
3. When the oil color becomes black or there is oil pollution (about 500 hours after each use), please change the oil once.
4. When changing oil, please unscrew the drain plug under the crankcase first, and then export the dirty oil with cardboard or other utensils. After the oil is cleaned, tighten the oil plug (preferably on the oil bolt) Universal glue or stop bleed to prevent oil leakage), re-add new oil to the oil mirror red circle when opening the fuel filler cap
5. Do not add new oil during operation.
6, avoid using concentrated lubricants and other miscellaneous oil waste oil.
Precautions:
1. Check the screws or nuts of each part for looseness.
2. Is the belt tight?
3. Is the pipeline normal and the oil level is suitable?
4. Is the wire and electrical switch in compliance with the regulations and the limits are correct?
5. Whether the fulcrums of each wheel have been fixed or stable.
6. Compression is whether the pulley is easily rotated by hand.
7. Before the compressor works, it is best to idle for 2 to 3 minutes or more, and then operate normally.
8. Check whether the running direction is the same as that of the pointing arrow. If it is not the same, please replace any two of the three power supplies with the three-phase motor.
9, the air cleaner should always check whether there is pollution, the filter cotton should often be removed for cleaning (with gas oil) or replacement, in order to maintain a good air filtration effect.
10. After the air compressor is used daily, the bucket drain valve should be unscrewed to remove the condensation water and oil in the barrel.
11, air compressor cylinder head and copper tube part, due to air compression and heat, the general temperature is very high, this is an inevitable phenomenon is not abnormal.
12. If the air compressor is in power or after use, please cut off the power to ensure safety.