Motorcycle starting battery is mainly used for motorcycle starting, lighting and ignition. According to the different sales objects, the market can be divided into supporting market and maintenance market. Among them, the supporting market is for new cars, and the maintenance market refers to the replacement of battery consumption in the process of use. Since a motorcycle requires a starting battery every time it is started, and because the battery has a limited life and needs to be replaced regularly, the starting battery of a motorcycle can be said to be a daily consumable for motorcycle use and needs to be replaced every two to three years on average.
Motorcycle Battery is generally 12V, such as 12V5AH, 12V7AH, 12V9AH and so on. Motorcycle battery maintenance methods can refer to the following:
1) battery liquid level check and supplement, motorcycle battery liquid level must be between the upper and lower limits, must not be lower than the lower limit, below the lower limit to timely supplement. When supplementing, do not inject dilute sulfuric acid; otherwise, the battery will be damaged due to high concentration of electrolyte. Can not add tap water, river water, etc. Because it contains calcium, magnesium plasma and impurities.
2) Check the status of the battery before charging, check whether the voltage of the motorcycle battery is lower than the standard value, and if possible, check whether the proportion of the electrolyte is lower than 1.28(20℃). To observe the battery inside, if there is one or several battery units corrosion, plate white, or the bottom of the material accumulation, or plate warping, the battery should be replaced. If the battery terminals are dirty and have been corroded or oxidized, use wire brush to clean them. If the cleaning is not enough, can drop a little electrolyte corrosion surface and wipe with water.
3) Battery charging, motorcycle battery maintenance is an important link, directly affects the life of the battery. When charging, the current cannot be too large, it is recommended not to use fast charging. When charging, unsealed battery should open the plug, and in a well-ventilated place away from the fire, to prevent hydrogen generated by charging accidents.
4) Test the battery after charging. After charging the battery, check it after standing for 30 minutes. Otherwise, the status of the battery cannot be accurately reflected. The 12-volt battery should be 12.8 volts or higher. If it falls below 12.7 volts, it needs to be recharged. If the battery is below 12 volts, it indicates that the battery is damaged and should be replaced.
Motorcycle Batteries,Lithium Motorcycle Battery,Lithium Ion Motorcycle Battery,Lithium Battery For Electric Motorcycle Jinhua Juxing Power Supply Co., Ltd , https://www.poweriderbattery.com
A nyloc nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component of the nyloc nut has a smaller inside diameter than the actual nut, thereby acting to lock the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning once tightened.
Â
Jiaxing Haina Fastener co. Ltd was established in 2010, located in the hometown of fasteners jiaxing city. For many years of export experience, our products has been best-selling in Europe, the United States, the Middle East and Southeast Asia. The products are manufactured by more functions machine, which is brought in domestic and foreign well-known enterprises. The products made are fully compatible with the international standards, well received by domestic and foreign customers. Through scientific management, Jiaxing Haina fastener Ltd company has been obtained ISO9000 certificate of Quality Managerment System, SGS and BV international certificate system of Make in China.
A nyloc nut is a fastener that incorporates a nylon component to effectively lock the nut into position on the bolt. The nylon component of the nyloc nut has a smaller inside diameter than the actual nut, thereby acting to lock the nut in place by squeezing the nylon firmly around the bolt when tightened. Unlike a standard locking washer, the nyloc nut prevents the nut from loosening under vibration as the nylon is tightly wedged into the bolt threads and provides resistance to turning once tightened.
Â
SS304 SS316 M12 DIN982 Stainless Steel Prevailing Torque Type Hex Thick Nuts with Non-Metallic Insert
Model NO.: DIN 982
Trademark: HNF
Transport Package: Carton and Pallet
Specification: SS304 SS316 M12
Origin: China
HS Code: 7318160000
Model NO.: DIN 982
Trademark: HNF
Transport Package: Carton and Pallet
Specification: SS304 SS316 M12
Origin: China
HS Code: 7318160000
Jiaxing Haina Fastener co. Ltd was established in 2010, located in the hometown of fasteners jiaxing city. For many years of export experience, our products has been best-selling in Europe, the United States, the Middle East and Southeast Asia. The products are manufactured by more functions machine, which is brought in domestic and foreign well-known enterprises. The products made are fully compatible with the international standards, well received by domestic and foreign customers. Through scientific management, Jiaxing Haina fastener Ltd company has been obtained ISO9000 certificate of Quality Managerment System, SGS and BV international certificate system of Make in China.