Super Cone Rubber Fender / Marine Fender (SCN1600H)

  • Model NO.: SCN1600H
  • Shape: Cone Type
  • Size: 1600h
  • Marine Parts: Fender, Bumper
  • Certification: BV, ISO9001, CCS, SGS, Lloyd′s
  • Transport Package: Container
  • Origin: Qingdao, China
  • Material: Rubber
  • Structure: Solid
  • Type: Inland and Coastal Boats
  • Usage: Ship Launching, Protection
  • Trademark: TIANDUN
  • Specification: CE, SGS, BV, Lloyd′s, ISO9001, H1600
Specifications
TIANDUN cone rubber Fender: 
1. PIANC standard approved 
2. Best quality and service 
3. Outstanding energy absorption 
 
Main Description of Tiandun Cone Rubber Fender:
TIANDUN cone rubber fender is the result of continuous product development. This fender design is based on the Cell Fender which was introduced to world-wide markets more than 25 years ago. This type of fender can be considered as the latest in state-of-the-art moulded fender products. Its refined geometry and conical shape result in a number of outstanding performance characteristics which include:
 
1.Internal overload stopper as standard
2.Outstanding energy absorption per weight of fender
3.Very good inherent resistance against shear forces due to its geometry and self-centering characteristics
4. No reduction of energy absorption up to 10° compression angle
5.High shear stability which allows the fender to carry even larger panel weights without using chains
6. Exceptional good energy absorption to reaction force ratio (E/R)
 
Availability in heights between 350mm and 2000 mm, each in 4 different rubber grades for the most precise fender selection.

 
 
 
Rubber grade
 Performance		 Rated deflection 70% Maximum deflection 72%
Reaction Force
(KN)		 Energy absorption
(KN·M)		 Reaction force
(KN)		 Energy absorption
(KN·M)
Super high reaction force (P2) 2942 2488 3280 2602
High reaction force (P1) 2334 1959 2633 2030
Standard reaction force (P0) 1818 1533 2075 1613
Low reaction force (P01) 1516 1288 1731 1345

Stereo Light Curing Molding - Sla

STEREO LIGHT CURING MOLDING - SLA
It mainly uses photosensitive resin as a raw material, and utilizes the characteristic that liquid photosensitive resin will cure quickly under ultraviolet laser beam irradiation. The photosensitive resin is generally liquid, and it immediately initiates a polymerization reaction and completes curing when irradiated with a certain wavelength of ultraviolet light (250 nm to 400 nm). SLA focuses on the surface of the light-curing material by focusing ultraviolet light of a specific wavelength and intensity to solidify it sequentially from point to line and from line to surface, thereby completing the drawing of a layered cross-section.

Sla,Sla 3D Printing Service,Sla Printing Service,Sla Rapid Prototyping

Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-machining.com