The scorching summer season has removed many hot and irritating seasons, adding to the nuisance of many swing arm garbage truck drivers. The reason is that when the temperature is relatively high, the tire-blasting accidents in various places are gradually increasing, and when it is their turn to be unlucky. In order to prevent the occurrence of a puncture, it is necessary to check the tires that are well- armed garbage trucks and replace them if necessary when they must be replaced. 1. No matter what brand of the wheel is placed on the bottom of the groove of the tread, there is a mark for observation of wear. In general, the degree of wear of the wheel of the swing arm type garbage truck is 1.6 mm, and this mark height is already the minimum groove depth of the legal tire, and the wear level mark of the heavy duty tire is 2.4 mm. Once it is more than the height of these marks, it is sure to be replaced. Some drivers think that the main reason is that tires can continue to be used without major problems. In fact, such thoughts and practices are extremely dangerous if the tires are on a relatively slippery road. The lines on the surface are no way out. The accumulation of water under the tires will result in the loss of control of the vehicle. 2. In the course of using the swing arm garbage truck on weekdays, if the car tire accidentally hits the road with the kan, or is struck by some sharp foreign objects, it will cause the tire to hurt. The common damage conditions of tires include the serious wear of the sidewalls, bulging of the tread, cracks in the tread, multiple tires being tied up by foreign materials, missing rubber in the tread, and so on. If there is a bulge on the tires of the vehicle, there will be a risk of explosion at all times. If the tires of the swing arm garbage truck have the above-mentioned conditions, it is necessary to go to a professional repair shop to carry out repairs or replace them. 3. Even if there are many good driving techniques and cares about the tires of the vehicles, once the tires have been used for a long time, they will all gradually become old. The service life of a wheel is generally about 5 years. If it exceeds this time, the tire will begin to age. If the tire is worn out, the main reason is that there will be cracks and surface hardening, and the aging tire is deformed easily after it loses its elasticity, and a puncture may occur at any time. Therefore, when the vehicle tires have exceeded the service life, it is safer to replace them.
We have various type and different ABS Sensor which can meet and satisfy your needs. The sensors we provide always praised by customers not only in quality and price but also in our service.
The ABS sensor is typically located in each wheel hub/rotor on a four channel ABS system. The anti-lock braking system uses an ABS or wheel sensor to monitor the wheel speed and send this information to the ABS computer. The ABS computer uses this information to prevent the brakes from locking during an emergency stop. If wheel speeds are not equal the computer modulates the anti-lock feature until the speeds are equalized.
Typically these sensors will fail as a result of clogging from metallic debris, brake dust or dirt due to exposure to the harsh elements. It is advisable to check it regularly.
Abs Sensor,Abs Probe Sensor,Auto Abs Sensor,Abs Wheel Speed Sensor NINGBO DGOFEN AUTO TRADE CO., LTD , https://www.dgofen.com
