Stainless Steel Processing,Stainless Steel Round Tube Processing,Stainless Steel Large Parts Processing,Stainless Steel Parts Grinding Machine Processing Shenzhen Kairui Precision Technology Co., Ltd. , https://www.krjgcnc.com
After years of research, some of the reasons for this happening are summarized as follows:
(1) Putty powder mixer, the viscosity of the stirred material is too large.
(2) Inclusion of debris in the device's housing.
(3) Shaft bending.
(4) The packing is too tight.
(5) The misalignment of different shafts of the putty powder mixer coupling .
(6) The current meter has failed.
(7) The pressure is too high or the pipe resistance is too large.
Knowing where things are prone to problems, the processing method is relatively easy. There are:
(1) Warming increases the viscosity of the liquid.
(2) Inspect the internal cavity of the putty powder mixer.
(3) Correct the curvature of the pump shaft or replace the pump shaft.
(4) Adjust the tightness of the packing.
(5) Find the concentricity of the coupling and meet the specified requirements.
(6) Repair or replace the ammeter.
(7) Adjust the pressure and clear the pipeline.
To increase the production efficiency, we must also avoid overloading the putty powder mixer.
When the motor of putty powder mixer is running, it will be overloaded. What are the reasons for this problem?