Sprinklers, also known as water tankers, water trucks or sprayers, play a pivotal role in urban construction. The sprinklers that are commonly seen are sprayed on the green belts on both sides of the city road or in the middle. However, in addition to cleaning and maintaining the green belts, the sprinklers are also used in the construction of construction companies, high-rise buildings, and various road areas. Big application. In addition to flushing, sprinklers also have functions such as pesticide spraying, guardrail rinsing, water transport, drainage, and emergency firefighting. Therefore, in terms of function, sprinklers can be classified into green sprinklers, water sprinklers, and fire sprinklers. Common sprinklers generally consist of chassis, tanks, piping systems, sprinklers, cabs, power take-offs, sprinklers, etc. The piping system is a system of pipes, ball valves, filters, and outlets. In two-step operation, the first step is to absorb water. The specific operation steps are: after parking, remove the water-absorbing rubber hose from the walk-out box and swing the hose backwards until the hose is not bent. Then, insert the water-absorbing hose into the water as deep as possible, and keep the difference between the tube and the liquid level always greater than 3cm. Push the four-way valve handle to the direction perpendicular to the ground, and then put the transmission into neutral, start the engine and separate. Clutch, pull the force again, the pump starts running. When the liquid level reaches the middle of the sight glass, quickly pull the suction hose away from the water or close the four-way valve. In this way, the water absorption step is completed. The second step is spraying. First, pull the rear handle of the four-way valve to the direction parallel to the ground, open the ball valve you want to spray (front flush, back spray, side spray, shower), and then start the engine and put the transmission into gear. Position the power take-off switch back and pull it out to pull the force. Then the clutch is disengaged, the pump starts to run, and the water sprinkling starts. After the sprinkled water is finished, the gear should be immediately released and the sprinkler pump should be stopped.
Cooking Oil Filter
We have all the Cooking Oil Machine,also can do the cooking oil whole project in different capacity.
For the oil filter,generally there have four types,they are press filter, Vertical blade vibration filter, Horizontal Oil Filter and Decanter Centrifuge. All of the filters have different size and different capacity.
The filter machine is an ideal filtration equipment for solid-liquid separation in the production process of oil, chemical, light industry, food, medicine and other industries
Oil Press Filter
We can produce different capacit Oil Press Filter, there have two kinds of material for plate, PP plate and castor iron plate.
This Oil Press Filter can be Manual pulling plate, hydraulic automatic pulling plate.
These Filter press equipment are widely used for the solid-liquid separation process in the industrial of mineral processing, petroleum, chemical industry, dyestuff, metallurgy, medicine, food, coal and carbon, inorganic salts, alcohol, light industry, textiles, environmental protection, energy and so on.
Features
1. It is controlled by PLC
2. The plate can be pulled automatically
3. No need workers operate it. It can achieve the full automation.
4. The rack has the function of hydraulic press, automatic control and automatic keeping the pressure. We just need control the button of the electronic control cabinet. It will start all of the operation or achieve the centralized control.
5. Filter press equipment equipped with the safety devices to ensure safe operation.
The Filtration Process
How does the Filter press equipment carry out the filtration process? The feeding pump injects the slurry into the filter press from the feeding head. The chambers created by the plates are filled up with the slurry, the cloth (specifically developed for each material) and the high pressure dry the cakes, faster and better. The clean water is discharged into drainage gutters, ready to be reused, and the cakes can now be disposed of easily.
Our main products are as below:
1. Oilseed Pre-treatment Machinery;
2. Oil Press/ Oil Expeller/ Oil Pressing Machinery / Edible Oil Processing Equipment;
3. Oilseed Pressing Line
4. Oil Solvent Extraction Machinery/ Food Oil Leaching Equipment;
5. Cooking Oil Refining Machinery/Edible Oil Refinery Equipment, and other Cooking Oil Processing Equipment.
6. Oil Filter
7. Oil Tank
8. Silo
9. We can contract for the Cooking Oil Production Line / Edible Oil Plant Turnkey Project from 2 ton to 1000 ton per day.
Oil Press Filter,Oil Filter Press,Plate Press Filter,Oil Filtration Machine,Oil Filter Machine,Plate Frame Filter Machine Hebei Huipin Machinery Co.,LTD , https://www.oilpresschina.com
