Wenva machine for biscuit All working procedures that from dough mixing,feeding, sheeting, moulding, scrap recycling, baking,cooling to stacking can be completed automatically in one line.   Different woking widths 620mm,800mm,1000mmm,1200mm are available.  Tunnel oven power resource: eletricity, natural gas, LPG.  High yield.  Multifunctional. Hard Biscuit, Soft biscuit, Cracker, Cookies. ( just need to install a cookies machine in the line, sharing the dowmstream machines) Dough mixer: used for dough mixing. Dough dump station: transport large batches of dough from portable dough troughs into a continuous dough feeding or sheeting system.   Dough feeding system : Dough is dumped into the Feeder and the conveyor moves the dough evenly and send the dough to the guillotine, the pneumatic-powered guillotine cut the dough into the right-sized pieces, the outlet conveyor to moves them to the sheeting equipment.   generates a consistent dough sheet ready for further thickness reduction or lamination. Two grooved rolls draw the dough into the pressurized cavity between the three rolls, and the dough is compacted and discharged as a continuous sheet. The thickness of the dough sheet is changed by adjusting the gap between rolls. Laminator(with flour sprayer): Gauge station (Two-roll sheeter): is a fundamental machine in most cracker, hard biscuit production lines. Parallel, hardened, solid-steel rolls reduce the dough sheet thickness. Rotary cutter: Rotary cuttier is forming machine for cracker and hrad biscuit. When dough sheet go through rotary cutter, it will be cut and shaped by moulds.  Rotary moulder: used to form the soft biscuit. After crushed by roller, the dough go through the moulder to form. Grooved feed roller ensures uniform pressure across the die roller. The distance between feed roller and die roller is adjustable. Separate machine: Separating the scrap from the biscuit sheet after rotary cutting.  Recycle device: transporting the scrap by conveyor to hopper of the three-roll sheeter for reuse. Baking Oven: Baking oven is used for baking biscuits, cookies and ruffles and potato chips and crisp and many more products. Heated by LPG and natural gas or electricity. Pre-manufactured and insulated in 3-m-modules for fast and easy installation. Burner flames heat up the burner chamber and the tubes in the heat exchanger. Heated air transferred via tubes to the top and the bottom of the baking chamber. Combustion gases removed by flue system without contacting the products. Heat recovery unit for energy savings and reduction of CO2 emissions. Burners controlled by temperature sensor to ensure constant and correct baking temperature. Band driving and tensioning stations ensure smooth running of the bands. PLC controlled and operation via touch screen.        Â
Nickel Based Laser
Cladding Powder
Ni base alloy
powder is mainly made of NiCrBSi or NiBSi. Ni-based self-fluxing powder has
good wettability, corrosion resistance and high temperature self-lubricating
effect, and is used in components with heat resistance, corrosion resistance and
thermal fatigue resistance. In general Ni35,Ni45,Ni60 etc can be used for laser
cladding, the No means hardness of powder. Inconel 625 and 718 has good
corrosion property under higher temperature, also widely used for laser
cladding process.
Cobalt based Laser
Cladding Powder
Cobalt-based alloy
powder is the cemented carbide resistant to various types of wear and corrosion
as well as high temperature oxidation. That is, the so-called
cobalt-chromium-tungsten (molybdenum) alloy or Stellite alloy cobalt-based
alloy is mainly composed of cobalt, containing a considerable amount of nickel,
chromium, tungsten and a small amount of molybdenum, niobium, tantalum,
titanium, Alloying elements such as lanthanum, and occasionally a class of
alloys containing iron.
Co-based self-fluxing
alloys have good high temperature performance and wear resistance and corrosion
resistance, and are used in petrochemical power, metallurgy and other
industrial fields where they are wear-resistant, corrosion-resistant and
high-temperature resistant.
Iron based Laser
Cladding Powder
The work pieces
required for laser cladding and manufacturing in the actual industry are mainly
carbon steel and cast steel. The Fe-based alloy is close to the base material
in composition and has good wettability. The advantage of Fe base powder is
lower cost and good wear resistant of cladding layer. As a result, it`s the
most widely used for laser cladding process. It is suitable for parts that
require local wear resistance and are easily deformed.
WC blended Laser
Cladding Powder
Tungsten carbide blended with Ni alloy powder is the best
choice for wear resistant work piece. This unique process can bring excellent
wear, corrosion and high temperature resistant. Our blend powder can achieve
different portion of WC from 35% to 60% without crack under suitable cladding
parameter.
Iron Alloy Powder,Nickel Alloy Powder,Cobalt Alloy Powder,Laser Cladding Powder Luoyang Golden Egret Geotools Co., Ltd , https://www.hvafspray.com
Wenva machine for biscuit is uesd for producing hard & soft biscuit, cracker, sandwich biscuit, core filling biscuit and wire cut cookies, deposited cookies.
Â
Soft biscuit cookie machine:
Wenva biscuit machine comprises various type of mixers, dough feeding systems, different configurations of sheeting equipment, laminator, rotary cutter at one or two rolls with its ancillary equipment (decorators, sugar or salt sprinklers), rotary moulder(for soft biscuit), Baking oven ( Convection , Direct Gas Fired or Hybrid at two or three combinations), Cooling conveyors, Stacker and final Packaging conveyor for product collecting. 
Â
Three-roll sheeter:
Â
Â
Cooling conveyor, stack and packing table.
biscuit sample
 Factaory
 
Working width
Length of oven
 Heating zone
Output capacity
620
50M
3
500-630KG
800
50-60M
4
750-1000KG
1000
50-60M
4
880-1130KG
1200
65M
4
1000-1250KG
Wenva 2017 Hot Sale Automatic Biscuit Production Line
Laminating produces a light, crisp texture, which cannot be achieved in any other way.