I believe that everyone understands the main advantages of winter tires, then what is the difference between the use of tires in the summer and the use of them? The following describes: 1. The degree of wear is different Everyone knows that winter tires are softer than summer tires, but its wear may be faster. Therefore, it is recommended that everyone's winter tires be suitable for the cold season. When the temperature rises, we will need to change to summer tires. Although it is a bit troublesome, there are no problems with using tires in winter for several years. 2. When to replace winter tires? usually. As soon as the temperature reaches 7 degrees Celsius, we must consider replacing the winter tires. Once below this temperature, the tire material system in the summer will harden and the strength of the ground will decrease. There are also some hidden dangers to security. Therefore, it is recommended that everyone must be replaced in time according to changes in temperature. 3 must be fully replaced When we replaced the winter tires, we couldn’t figure out how to save time. Some owners thought that it would be sufficient to change the front two tires. Anyway, the most important thing was that the front two tires were hard. In fact, what we do not know is that if the front and rear tires are not the same, the strength of their landing is not the same, which is particularly likely to lead to unbalanced driving of the vehicle. It is particularly difficult when turning. Dangerous. Therefore, it is recommended that you replace all winter tires. So what are some things we should pay attention to when using winter tyres? 1. The temperature in winter is low, and the tire valve is particularly vulnerable to air leakage, so we have to check its air pressure from time to time. Prevent the lack of gas on the road. 2. Winter tyres that are more than four years old will be easily deteriorated in terms of material quality. Therefore, we must consider renewing at this time and we must not use money to save money. This has caused some hidden troubles. 3. The road surface in the winter is unstable and unstable, because after the winter tires generate friction, the ground contact area of ​​the tires will be reduced a lot, so we need to exchange the front and rear tires with each other from time to time. 4. When not using the vehicle, it is best to equip the tire with a wheel hub so that it can be inflated at any time. Irregular check tire pressure is not in the normal state. As a professional manfuacturer for ejector sleeve with high quality DIN standard H7/H5 tolerance.Producing full range of ejector sleeve size with high precision and precision tolerance.Top quality,best price and fast leadtime with SKD 61 nitrided material and hardened ejector sleeve. With a lots of experience for the OEM ejector sleeve.We have been supplied to the top brand in the world company. Ejector Sleeve,Mold Ejector Sleeve,H5 tolerance Ejector Sleeve Injection Molding,Ejector Sleeves Catalog Changsha Borun Mould Co. Ltd. , https://www.borunmouldparts.com