Automatic Electro-Gas Vertical Welding Machine for Tank Seam (EGW)

We supply tank construction equipments of welding machines and hydraulic jacks system
MEGW/FCAW-I vertical welding equipment is supplied with two welding carriages (MEGW electrogas welding carriage and MATIC-I welding carriage) .
MEGW electrogas welding carriage is designed to weld vertical joints of carbon steel, it features high heat input to achieve maximum productivity while maintaining acceptable quality.
Figure 2: MEGW/FCAW-I process for EGW of vertical joints
 
MATIC-I welding carriage helps to make the vertical seam welds with increased precision and repeatability. By incorporating the linear weaver, the carriage can help to increase your overall fabrication productivity.

We supply tank construction equipments of welding machines and hydraulic jacks system
MEGW/FCAW-I vertical welding equipment is supplied with two welding carriages (MEGW electrogas welding carriage and MATIC-I welding carriage) .
MEGW electrogas welding carriage is designed to weld vertical joints of carbon steel, it features high heat input to achieve maximum productivity while maintaining acceptable quality.
Figure 2: MEGW/FCAW-I process for EGW of vertical joints
 
MATIC-I welding carriage helps to make the vertical seam welds with increased precision and repeatability. By incorporating the linear weaver, the carriage can help to increase your overall fabrication productivity.

C type single column hydraulic press have a lot of advantage, like the fuselage all stell welding, lower worktable equipped with hydraulic cushion electric controller is PLC. Centralized control buttons, which can realize the adjutment, manual and semi-automatic mode operation. According to the structure type, the hydraulic machine has two columns, four columns, eight columns, welded frame and multi-layer steel strip winding frame, and the medium and small vertical hydraulic machines are also C-frame type. The C-frame hydraulic press has three sides open for easy operation but poor rigidity. The welded frame hydraulic press for stamping has good rigidity and is open at the front and rear, but closed at the left and right. In the vertical four-column free forging hydraulic machine of the upper transmission, the cylinder is fixed in the upper beam, the plunger is rigidly connected with the movable beam, and the movable beam is guided by the column, and moves up and down under the pressure of the working fluid. There is a workbench on the beam that can move back and forth. An anvil and an anvil are respectively installed under the movable beam and on the work surface. The working force is supported by a frame composed of upper and lower beams and columns. Large and medium-sized free forging presses driven by pump-accumulators often use three working cylinders to achieve three-stage working force. There is also a working cylinder

C Type Hydraulic Press

C Type Hydraulic Press,C Type Hydraulic Press Machine,Small C Type Hydraulic Press,C Frame Type Hydraulic Press

CHENGDU ZHENGXI HYDRAULIC EQUIPMENT MANUFACTURING CO., LTD. , http://www.zxhydraulic.com