Container Ramp,Shipping Container Dimensions ,High Cube Container ,Flat Rack Container Storage Racks Co., Ltd. , http://www.nbtrailer.com
Application:
This crane is a special product equipped with electromagnetic carrier beam that used to lift iron or steel plates, pipes and so on. It consists of bridge, crane travelling mechanism, trolley, electric equipment and lifting beam. Both travelling mechanism and trolley motors are special motors for cranes, large starting torque and loading capacity.
The electromagnetic beam can be taken down from the hook or desinged as fix hanger. The beam length can be designed as requirements. The beam can be parallel of plumbing with crane girders depending on transporting environment.
For higher application requirements, extractable and 360 degree electromagnetic beam suspending system can be provided. Double Girder Overhead Magnet Crane 40 ton
The number of rectangular magnets below spreader beam is considered to the size of long billet need to be lifted.
Maximum back up time of battery for magnets shall have of 30 minutes.
The magnets is suitable for temperature under 200 deg C.
Full length chequered plate platform at both sides. The minimum width of platform as request.
Load cell for over load protection of hoist on request.
Alarm bell provided for safety purpose.
Canopy is provided for electrical equipments for weather protection outdoor. Rail anchoring & storm anchoring are all on request. Double Girder Overhead Magnet Crane 40 ton
The General arrangement drawing with load data & Quality Assurance Plan will be submitted with offer
Initial fill of lubricants, gear box oil etc., supplied along with the crane.
Performance feature:
The carrier-beam is cross structure, which is reliable and has good safety features, and has a certain function of preventing swinging. The lower part of the carrier-beam can bring special lifting appliances, such as magnetic chuck and tongs, etc.
Safety Feature:
Main lifting motor with thermal protection,
Overload protection,
Rubber buffers Double Girder Overhead Magnet Crane 40 ton
Protective earthing,
Crane switch and travel end switch,
Emergency switch can stop all movement when any dangerous happened,
Sub-assemblies characteristic are tested before assembly.
All cranes must be pre-assembled and tested before leaving factory and offer the certification of test.
Used in:
Ship Yards
Metal Working
Service Centers
Cutting Table Operations
Shipping and Receiving
Fabricating Areas
Welding Departments
Customization
We can design cranes meets your need, it would be very kind of you to give us the data needed listed below:
1. Lifting capacity.
2. Span length. (cantilever length)
3. Lifting height. (hook center to ground)
4. Power supply: Voltage.
5. Do you need rails? How long is the crane traveling distance?
6. Working condition: Which material to lift? Temprature?
7. Would be better if you have drawings of your plant.
ITERM
 QC type grab crane
Lifting Capacity
t
5
10
16
20
Span
m
to 31.5
Working Class
Â
A6
Speed
Hoist
m
/
min40.1
40.7
41.8
48.6
Trolley
44.6
45.6
41.8
48.6
Crane
93.7
86.4
76
89
89
87.3
87.3
Motor
hoist closing
Kw
YZR225M-8/22*2
YZR280S-10/37*2
YZR315M-10/75*2
YZR355M-10/90*2
trolley
YZR132M 2 -9/3.7
YZR160M 2 -6/7.5*2
YZR160M 2 -6/7.5
crane
YZR160M 1 -5.5*2
YZR160M 2 -6/7.5*2
YZR160M 2 -6/7.5*2
YZR160L-6/11*2
YZR160L-6/11*2
YZR180L-8/11*2
YZR180L-8/11*2
YZR200L-8/15*2
Power
Â
3-phrase 50HZ 220V~480V according to your requirements
Working environment
Â
The temperature of working environment is -10~+60° C;
The relative humidity is no more than 50% when the temperature is +40° C;
Application:
This crane is a special product equipped with electromagnetic carrier beam that used to lift iron or steel plates, pipes and so on. It consists of bridge, crane travelling mechanism, trolley, electric equipment and lifting beam. Both travelling mechanism and trolley motors are special motors for cranes, large starting torque and loading capacity.
The electromagnetic beam can be taken down from the hook or desinged as fix hanger. The beam length can be designed as requirements. The beam can be parallel of plumbing with crane girders depending on transporting environment.
For higher application requirements, extractable and 360 degree electromagnetic beam suspending system can be provided. Double Girder Overhead Magnet Crane 40 ton
The number of rectangular magnets below spreader beam is considered to the size of long billet need to be lifted.
Maximum back up time of battery for magnets shall have of 30 minutes.
The magnets is suitable for temperature under 200 deg C.
Full length chequered plate platform at both sides. The minimum width of platform as request.
Load cell for over load protection of hoist on request.
Alarm bell provided for safety purpose.
Canopy is provided for electrical equipments for weather protection outdoor. Rail anchoring & storm anchoring are all on request. Double Girder Overhead Magnet Crane 40 ton
The General arrangement drawing with load data & Quality Assurance Plan will be submitted with offer
Initial fill of lubricants, gear box oil etc., supplied along with the crane.
Performance feature:
The carrier-beam is cross structure, which is reliable and has good safety features, and has a certain function of preventing swinging. The lower part of the carrier-beam can bring special lifting appliances, such as magnetic chuck and tongs, etc.
Safety Feature:
Main lifting motor with thermal protection,
Overload protection,
Rubber buffers Double Girder Overhead Magnet Crane 40 ton
Protective earthing,
Crane switch and travel end switch,
Emergency switch can stop all movement when any dangerous happened,
Sub-assemblies characteristic are tested before assembly.
All cranes must be pre-assembled and tested before leaving factory and offer the certification of test.
Used in:
Ship Yards
Metal Working
Service Centers
Cutting Table Operations
Shipping and Receiving
Fabricating Areas
Welding Departments
Customization
We can design cranes meets your need, it would be very kind of you to give us the data needed listed below:
1. Lifting capacity.
2. Span length. (cantilever length)
3. Lifting height. (hook center to ground)
4. Power supply: Voltage.
5. Do you need rails? How long is the crane traveling distance?
6. Working condition: Which material to lift? Temprature?
7. Would be better if you have drawings of your plant.
ITERM
 QC type grab crane
Lifting Capacity
t
5
10
16
20
Span
m
to 31.5
Working Class
Â
A6
Speed
Hoist
m
/
min40.1
40.7
41.8
48.6
Trolley
44.6
45.6
41.8
48.6
Crane
93.7
86.4
76
89
89
87.3
87.3
Motor
hoist closing
Kw
YZR225M-8/22*2
YZR280S-10/37*2
YZR315M-10/75*2
YZR355M-10/90*2
trolley
YZR132M 2 -9/3.7
YZR160M 2 -6/7.5*2
YZR160M 2 -6/7.5
crane
YZR160M 1 -5.5*2
YZR160M 2 -6/7.5*2
YZR160M 2 -6/7.5*2
YZR160L-6/11*2
YZR160L-6/11*2
YZR180L-8/11*2
YZR180L-8/11*2
YZR200L-8/15*2
Power
Â
3-phrase 50HZ 220V~480V according to your requirements
Working environment
Â
The temperature of working environment is -10~+60° C;
The relative humidity is no more than 50% when the temperature is +40° C;
Double Girder Overhead Magnet Crane
Model NO.: QC
GB/T 28001-2001, Ohsas18001: 1999: Pass
Current Overload Protection System: Include
Voltage Lower Protection Function: Include
Weight Overload Protection Device: Include
Limited Switch: Include
Painting Color: According to Your Demand
Sandblast: Could Supply
Working Duty: A5, A6, A7, A8
Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage
Sling Type: Wire Rope
Power Source: Electric
Moving Type: Wheel
Installation: Overall Rapid Disassembly
Tower Crane Type: Overhead Magnet Crane
Trademark: KUANGYUAN
Transport Package: Packed by Plywood Crate and Plastic Woven Cloth.
Specification: China National standard
Origin: Xinxiang, Henan Province
HS Code: 84261930
Model NO.: QC
GB/T 28001-2001, Ohsas18001: 1999: Pass
Current Overload Protection System: Include
Voltage Lower Protection Function: Include
Weight Overload Protection Device: Include
Limited Switch: Include
Painting Color: According to Your Demand
Sandblast: Could Supply
Working Duty: A5, A6, A7, A8
Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage
Sling Type: Wire Rope
Power Source: Electric
Moving Type: Wheel
Installation: Overall Rapid Disassembly
Tower Crane Type: Overhead Magnet Crane
Trademark: KUANGYUAN
Transport Package: Packed by Plywood Crate and Plastic Woven Cloth.
Specification: China National standard
Origin: Xinxiang, Henan Province
HS Code: 84261930
Double Girder Overhead Magnet Crane