Micro Wire Rope 1.4mm, Coated Wire Rope 1.4mm,Flexible Rope 7x19-1.0mm,Flexible Wire Rope 1.4mm Jiangyin Yunfeng Steel Wire Rope Products Co.,Ltd. , https://www.wireropegym.com
Focus on how to maintain the ultraviolet aging resistance test box
Focus on how to maintain the ultraviolet aging resistance test box
The ultraviolet aging resistance test box simulates the damage caused by the sun's ultraviolet light, and conducts the urban weather resistance test on the material by exposing the tested material to light under controlled high temperature. It uses ultraviolet lamps to simulate the radiation effect of sunlight, and simulates dew and rain through condensation and water spray. In just a few days or weeks, the ultraviolet radiation equipment can reproduce what it takes months or even years outdoors. Damage that only occurs over time, including fading, color change, tarnishing, chalking, cracking, cracking, wrinkling, blistering, embrittlement, strength reduction, oxidation, etc. The test results can be used to select new materials and improve current Have materials, or evaluate changes in material formulations.
How to maintain the ultraviolet aging resistance test chamber during daily use? Application personnel should pay attention to the following points:
1. Non-full-time operators shall not operate at will.
2. Do not subject the sensing device in the working room to strong impact
3. Adequate water supply must be maintained during equipment operation.
4. During the test phase, the time to open the door should be minimized
5. After a long period of non-use, if you need to use it again, you must carefully check the water source, power supply and various components, and then start the equipment after confirming that it is correct.
6. Because ultraviolet radiation has a strong hazard to personnel (especially eyes), operators should minimize exposure to ultraviolet rays (contact time should be less than 1min). It is recommended that operators wear protective goggles and protective sleeves.
7. Please contact our company when the equipment fails to be solved by yourself.
Limiting conditions for samples of ultraviolet aging resistance test box:
Test and storage of flammable, explosive and volatile substance samples
Test and storage of corrosive material samples
Testing or storage of biological samples
Test and storage of strong electromagnetic emission source samples