Fuel and Electrical Compact Marine Waste Incinerator

Model NO.: Marine Waste Incinerator

Processing Methods: Combustion

Waste Incinerator Pullution Sources: Solid Waste Processing

Certification: CCS/ABS/Uscg/Lr Incinerator

Capacity: 22.5kg/H~100kg/H

Heating Source: Electrical Elements,Steam and Thermal Coil

Trademark: GR Marine Waste Incinerator

Transport Package: Plywood Case Uscg Incinerator

Specification: CCS/USCG/LR/ABS Marine Incinerator

Origin: China Uscg Marine Incinerator

HS Code: 8417809090
Fuel and Electrical Compact Â Marine Waste Incinerator

The Gathering marine incinerator type INC-18, which is designed for on board incineration of ship's waste oil and solid, it mainly consists of four parts:
A. Combustion chamber with diesel oil burner, sludge burner, and electric control panel.
B. Flue gas fan
C. Flue gas damper.
D. Sludge tank with circulating pump and heater.

Waste Incinerator Details
The incinerator INC-18 is equipped with single door in front, which are intended for loading
Of solid waste and ash removing, the incinerator in stand-by mode(COM. Tem. Less than 220Â° C), the doors can be opened properly. If the incinerator is running in cooling down mode, the door can be opened till COM. Tem. Less than 100Â° C and incinerator fully stop.

The electrical control panel is installed on the incinerator and it contains fuses, starters, PLC and
Operator panel. The electric panel is built according to international standards for marine equipment.

The operator panel which is located at the right side of the control panel has a touch screen and
Defined keys for system starting/stopping and selecting burner modes. The burning process is controlled by the PLC and monitored by the HMI(human machine interface)and scanned by a photo resistor. The combustion chamber temperatures are also regulated automatically by the PLC control system.

Â

Type INC-18 Â

Capacity 180,000Â kcal/h (Â 208KW)
22.5Â kg/h IMO sludge oil
14,4000Kcal/h solid waste IMO sludge (20% water content) IMO class 02 solid waste

Combustion chamber temperature Max.Â Â Â Â Â Â Â Â Â Â 1180Â 8C WorkingÂ Â Â Â Â Â Â 850-1150Â 8Â C Â

Flue gas temperature Max.Â Â Â Â Â Â Â Â Â Â Â 375Â 8C WorkingÂ Â Â Â Â Â Â Â 250-340Â 8Â C Â

Surface temperature Less than ambient temperature +20Â 8Â C , and less than 60Â°C Â

Electrical power Consumption 7kW Â

Negative pressure 5-35 mm WC Negative pressure in combustion chamber

Total weight 1500 kg Â

Outline dimension Â See dimension drawing (APPENDIX)

Other models available
Â INC-18 Â (180,000 Kcal/H,22.5kg/h)
Â INC-50 Â (500,000 Kcal/H,63kg/h)
Â INC-80 Â (800,000 Kcal/H,100kg/h)

Medical Waste Incinerator

OEM Incinerator acceptable, please contact us without hesitate if need Waste Incinerator or other waste treatment equipment. Thanks
Â
Heat Sink
Aluminum radiator is also known as radiator aluminum or sunflower aluminum, aluminum radiator has the characteristics of beautiful appearance, light weight, good heat dissipation performance, good energy saving effect.

The processed aluminum radiator surface is anodized to improve the corrosion resistance, wear resistance and appearance of aluminum.

At present, the common types of radiator aluminum profiles in China are: electronic, electrical, computer radiator aluminum profiles, sunflower aluminum profiles, power semiconductor with radiator profiles, etc.

Because of its superior performance, aluminum radiator is widely used in machinery, automobile, wind power generation, construction machinery, air compressor, railway locomotive, household appliances and other industries.

The main advantages are:

(1) The heat dissipation of aluminum radiator is better, and the characteristics of energy saving are very obvious. In the same room, if the radiator with the same specifications is used, the number of aluminum cast pieces is less than that of steel.

(2) Aluminum radiator oxidation corrosion resistance is good, without adding any additives, the principle is that once aluminum meets oxygen in the air, it can generate a layer of oxide film, the film is tough and dense, to prevent further corrosion of the body material.

Heat Sink,Cnc Lathe Parts,Aluminum Cnc Machining,Aluminum Parts Machining
Jiangyin Yuanlv New Energy Materials.Co.,Ltd , https://www.yuanlval.com