To obtain perfect joins, inside of the solder ring copper fitting and the outside of the copper pipe are cleaned using coarse steel wool, flux paste is applied, the pipe is then inserted into the fitting and heat applied from a portable propane torch until a ring of solder shows at the edges of the fitting. Sizes we have available are from 8mm to 54mm For EN1254-1 and 1/2" to 2" for ASME B16.22 ,solder ring Copper Fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings solder ring copper fittings,presolder copper fittings,yorkshire copper fittings,pegler copper fittings,connex copper fittings Taizhou Runde Company , https://www.smartfittings.com
With years of remarkable exploration, trial and innovation, our Vacuum Lifting
Equipment has reliable quality and its unique technology, to ensure easy and
safe transport.
CHOOSE US, BENEFIT YOU.
1) Labor cost saving.
2) Increased productivity thanks to timesaving operation.
3) To work ergonomically and protect operator healthy.
4) Excellent work safety and process reliability thanks to unique vacuum automatic compensation system.
5) No applied mechanical damage caused by using the lifter.
1. PRODUCT DESCRIPTION
The lifter is designed for manual operation. The entire system consists of electric vacuum gripping
device, manual tilting device, manual rotation device, and safety protection system, to achieve gripping,
lifting, moving and placing glass to specific location by a serial of process setting. The lifter can be
assembled to various kinds of models to fit for different size of glass.
2. PRODUCT CHARATERISTICS
Code
SH-XD4-04 (A)
Size (mm)
1000mm (L) * 940mm (W) * 300mm (H)
Weight (kg)
75kg
Driven System
Electric Components Integration
Suction Cup
Round sucker; NBR material; oil & abrasion resistance; location adjustable; with buffer spring for height compensation
No. & Size of Cups
4 pads; 300mm diameter
Structure
X type; steel material; ergonomic design
Max. Glass Size
3000mm (L) x 2000mm (W) x 4-25mm (T)
Min. Glass Size
1000mm (L) x 1000mm (W) x 4-25mm (T)
Max. Lifting Weight
400kg
Lifting Material
Glass, marble, plastic boards, metal sheets, coated boards and other plates.
Usage
Gripping, lifting and handling in the glass production and processing line, and glass packaging, well used in the glass installation, like curtain wall.
Installation Request
Hanged on the pillar jib crane or frame crane or bridge crane; outer electricity supply when charge needed.
Packaging
Plywood Case
Delivery Time
Within 20 days after receiving the payments
Payment terms
L/C, T/T
MOQ
1 set
Supply ability
500 sets per month
Certificate
CE, SGS
Others
OEM / ODM accepted
Maximum Loading
400 kg
Factor of Safety
2.5
Standard Working Power
12V DC
Battery Charge
110V / 220V, 50/60Hz
Noise Level
< 60 Db
Vacuum Holding time
More than 30 minutes after power loss
Gripping
Suction cups in vacuum state
Tilting
Manual tilt, 90° between upright and flat, with latching in upright position
Rotation
Manual rotation, 360° edgewise, with locking at each quarter point
Safety protection
Vacuum non-return system and vacuum compensation system
Vacuum compensator
When vacuum reaches to the specified pressure, vacuum pump automatically stops to achieve energy saving; when vacuum pressure is insufficient, it automatically restarts to achieve vacuum compensation.
Control method
Buttons on the remote control
Factor of safety
According to the European CE safety requirements for lifting equipment, and safety regulations on the German accident prevention regulations UVV 18 and VBG 9a, the better safety factor for vacuum lifter is 2.5. For example, each sucker 300mm dia., with suction reaching to 330kgf, divided by the safety factor 2.5, can load 132kg. If the lifter uses 4 suction cups, the total suction is 132*4=528kg, greater than approved glass 400kg. When the glass is handled and transported vertically, it should be multiplied by the coefficient of friction 0.8 (between rubber and glass), 528kg*0.8=422kg, still greater than the approved glass 400kg.
Safety Protection Instruction
Once glass sucked, the system is under airtight state. The only entrance for air is backflow from vacuum generator to destroy system's vacuum state. Therefore, the lifter is equipped with the safety non-return valve, for which air can only be extracted from inner system, with no return, and through which it can ensure sufficient vacuum to keep absorption time when power loss.
Vacuum Compensation Protection
Not worried about air leakage and insufficient vacuum, because the lifter is equipped with pressure sensor and vacuum compensation system. When vacuum is not enough, the system automatically senses and resumes operation to keep sufficient vacuum.
5. APPLICATION SAMPLE
6. CHOOSE THE RIGHT VACUUM LIFTER FOR YOUR NEEDS:
1) Pneumatically or electrically driven by vacuum system.
2) Pneumatically, manually, or electrically performance/function.
3) Tilting, rotation, or both.
4) For safety, automatic vacuum compensator and safety protection system needed.
We focus on the good quality, but reasonable price. More infomation about company and products,
please kindly click the following website www.fsshengheng.com for your reference, or contact us Email
Glass Sucker for Handling and Transport
Â
3. PRODUCT TECHNIQUEÂ
Â