Lead: Do you know what external factors will affect the life of the infrared thermometer? So how do you maintain and maintain the infrared thermometer? Pellet Mill Accessories widely used in blanking, die forging, cold heading, extrusion, powder metallurgy parts pressing, pressure casting, and engineering plastics, rubber, ceramics and other products of the pressure molding or injection molding process. Pellet Mill Accessories,Wood Pellet Mill Accessories,Wood Pellet Mill Parts,Wood Pellet Machine Parts Jinan Shanghangda Machinery Co., Ltd. , https://www.shdmachines.com
Moisture factors: Some moisture, rain, dew, etc. are all factors that cause moisture. Dew formed by moisture is the main factor for outdoor moisture. Dew is more harmful than rain, because it has more time to attach to materials. Long, causing more severe moisture absorption. In the infrared thermometer simulation test, the damage mechanism of the composite material caused by the humid environment has been studied more clearly. Taking the diffusion of water into carbon fiber epoxy resin laminates as an example, the aging mechanism of composite materials in a humid atmosphere is described.
Illumination factors: The structure of different products of infrared thermometers also differs in intensity of illumination. For example, those durable materials, such as plastics, paints, etc., which meet the light, will not cause serious aging. Therefore, it is necessary to analyze the material composition of the product equipment.
High temperature factor: When the ambient temperature rises due to the high temperature, the intensity and damage of the light increase. There is no direct chemical reaction between temperature and light, but there is a delicate connection between them. Therefore, when testing a programmable infrared thermometer product, it is necessary to grasp the precise temperature range.
When maintaining the infrared thermometer, pay attention to the following points:
1. Do not aim the laser directly at the eye or illuminate the eye with a reflective surface (such as specular reflection) while measuring;
2. During use, care must be taken to avoid placing it in places with excessively high humidity or direct sunlight;
3, do not use for a long time, be sure to remove the battery, replace the new battery in time when the battery is low, so as not to affect the measured value of the error;
4. After the test is over, you must wipe the lens. You can not use any solvent to clean the lens. After the dust is blown off with compressed air, wipe it with a wet cotton cloth or a soft cloth.