I think this problem is the problem that all sprinkler masters want to know. The bigger the better the sprinkler is, the better the user always wants to use the sprinkler and the use process. In actual use, it would be too short to sprinkle water, increase the number of water additions, increase the fuel consumption for air-carrying and re-entry operations, increase expenditures, and have poor social and economic performance. The main function of the sprinkler operation is to reduce the heat and cool the air and press the dust to purify the air. If the amount of water is too large, partial water will accumulate due to the unevenness of the ground, and part of the water will flow into the sewers along the way. This will cause water resources and economic waste. If there is much mud on the ground, muddy formation is likely to occur. This is caused by the adhesive tape of the vehicle tires. The extension of ground pollution, after the ground dries up, forms a larger area of ​​dust and sludge. The resulting topic is that watering operations should be carried out after the ground has been cleaned, and it is more difficult to sweep if the ground is heavily polluted. The amount of watering is not good. So sprinklers should avoid this problem. (In addition, the sprinkler can freely adjust the amount of water. The high-pressure device of the sprinkler can scavenge the front surface and then sprinkle the water after spraying. This will not allow water and debris to be mixed together. The sanitation workers only need to Sweep the pavement on both sides) Fully Enclosed Cutter With Sewage Treatment Fully Enclosed Cutter With Sewage Treatment,Fully Enclosed Waterjet Cutting Machine,Fully Enclosed Cutter,Fully Enclosed Waterjet Cutter Jiangsu Sunshine Intelligent Equipment Co.,Ltd. , https://www.sunshinewaterjet.com