Longgong two excavator new products debut 2008 BMW show

Bauma china 2008 is the debut of the "BMW Exhibition" by Longgong. Among the six series and more than 100 products developed by Longgong in recent years, Longgong has been selected for excellence in the selection of the top ten, carefully selected the top ten products, and exchanged skills with domestic and foreign counterparts. Review of customers at home and abroad. Among them is the LG6065B excavator using Rexroth's LUDV system, which is energy-saving and environmentally friendly, and has a small size and power; the LG6225 excavator with GPS fault diagnosis and online maintenance, low-temperature preheating control, and integrated electronic control operation function.

Longgong two excavator new products debut 2008 BMW show

Longgong two excavator new products debut 2008 BMW show

Longgong two excavator new products debut 2008 BMW show

Longgong two excavator new products debut 2008 BMW show

Related: bauma dragon excavator

For KATO Cylinder Seal Kit

The replacement process of excavator hydraulic cylinder is as follows:
1. Turn off the hydraulic system: Before replacing the hydraulic cylinder, it is necessary to turn off the system to avoid liquid leakage in the hydraulic system.
2. Disassembling the hydraulic cylinder: Disassembling the hydraulic cylinder requires the use of tools such as wrenches, screwdrivers, etc. Firstly, the hydraulic pipeline needs to be removed, and then the bolts of the hydraulic cylinder need to be removed to remove the hydraulic cylinder from the machine.
3. Check the hydraulic cylinder: Check if there is any damage to the hydraulic cylinder, and if there is any damage, replace it.
4. Install a new hydraulic cylinder: Install the new hydraulic cylinder onto the machine and secure the cylinder with bolts.
5. Connect hydraulic pipeline: Connect the hydraulic pipeline to the hydraulic cylinder, pay attention to the position and direction of the connection, and ensure that the connection is secure.
6. Test system: after replacing the hydraulic cylinder, it is necessary to test whether the system operates normally, check whether the hydraulic cylinder operates normally, and deal with any problem in time.
7. Cleaning work: Clean the liquid and debris in the hydraulic system to ensure that the system is clean and avoid any impact on the system.