Sodium Ascorbyl Phosphate,Sodium Calcium Ascorbyl Phosphate,Phosphate Ester Sodium,Sodium Ascorbyl Phosphate Eucerin JINGJIANG HENGTONG BIO-ENGINEERING CO.,LTD , https://www.jjhtbio.com
For production of customizes different solutions according to clients'Â demands on product structure, shape which has width from
720mm to 1130mm and thickness from 0.8mm to 3.0mm with round wave type and trapezoidal shape, also possible for multi-layers design.
Advantages:
   perfect solution;
   good performance and high quality of final product;
   polish and electroplated treatment;
Work flow and detailed information:
FeederÂ
• To feed material into extruder;
Extruder
• World famous brand electrical component such as    Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
• Bimetallic screw and barrel;
• Intelligent PLC controlling system with human-friendly interface.Â
Co-extruder
• World famous brand electrical component such as Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
• Intelligent PLC controlling system with human-friendly interface.Â
Flat die and feed block
• Coat hanger type
• 5CrNiMo steel and P20 material
• Apply to single lay and muti layer with top layer adopts PMMA/ASA co-extrusion
• Support trolley is include
Calibration table
• Specified design of Calibrator ensuring faster heating transfer and quickly cooling calibration
• Guillotine cutter ensuing flat and chip free cutting
• Tracking cutter especially for thick and high filler product
• Haul off machine with adopts wear-resisting rubber roller
• Speed driving by frequency inverter
Ridge tile calibrator
• Pneumatic driving
• High quality cast aluminum material
• Double station heating oven is include
Stacker
• Stainless steel304 as touching material
Main elements brand:
 
Technical Parameter:
Structure
           Material
           Width
Thickness
                         Extruder Model
Designed Output
Single layer
PVC
720/920/1100/1130mm
1.0-3.0mm
ACE80/156
350-400kg/h
Double layers
ASA/PMMA+PVC
720/920/1100/1130mm
1.0-3.0mm
ASS50/30+ACE80/156
350-400kg/h
Triple layers
ASA/PMMA+PVC+PVC
720/920/1100/1130mm
2.0-3.0mm
ASS50/30+ACE65/132+ACE51/105
350-400kg/h
Triple layers
PVC+PVC foamed+PVC
720/920/1100/1130mm
2.0-3.0mm
ACE51/105+ACE65/132+ACE51/105
350-400kg/h
Four layers
ASA/PMMA+PVC+PVC foamed+PVC
720/920/1100/1130mm
2.0-3.0mm
ASS50/30+ACE51/105+ACE65/132+ACE51/105
350-400kg/h
Our service:
In order to provide you the specific proposal, please advise:
Contact to ACEEXTECH:Â
JIANGSU ACEEXTECH MACHINERY CO., LTD
Tel:+86-512 58620105
Fax:+86-512 58620107Â Â Â
Mobile : +86 18021237973
Website:www.aceextech.comÂ
Add:No.18 Yuefeng Road, Nanfeng Town, Zhangjiagang City Jiangsu, China, 215600
Â
For production of customizes different solutions according to clients'Â demands on product structure, shape which has width from
720mm to 1130mm and thickness from 0.8mm to 3.0mm with round wave type and trapezoidal shape, also possible for multi-layers design.
Advantages:
   perfect solution;
   good performance and high quality of final product;
   polish and electroplated treatment;
Work flow and detailed information:
FeederÂ
• To feed material into extruder;
Extruder
• World famous brand electrical component such as    Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
• Bimetallic screw and barrel;
• Intelligent PLC controlling system with human-friendly interface.Â
Co-extruder
• World famous brand electrical component such as Siemens,Schneider, ABB etc;
• High torque gearbox with adopts NSK/SKF bearing;
• Siemens/WEG original motor achieved global after service;
• Intelligent PLC controlling system with human-friendly interface.Â
Flat die and feed block
• Coat hanger type
• 5CrNiMo steel and P20 material
• Apply to single lay and muti layer with top layer adopts PMMA/ASA co-extrusion
• Support trolley is include
Calibration table
• Specified design of Calibrator ensuring faster heating transfer and quickly cooling calibration
• Guillotine cutter ensuing flat and chip free cutting
• Tracking cutter especially for thick and high filler product
• Haul off machine with adopts wear-resisting rubber roller
• Speed driving by frequency inverter
Ridge tile calibrator
• Pneumatic driving
• High quality cast aluminum material
• Double station heating oven is include
Stacker
• Stainless steel304 as touching material
Main elements brand:
Â
Technical Parameter:
Structure
           Material
           Width
Thickness
                         Extruder Model
Designed Output
Single layer
PVC
720/920/1100/1130mm
1.0-3.0mm
ACE80/156
350-400kg/h
Double layers
ASA/PMMA+PVC
720/920/1100/1130mm
1.0-3.0mm
ASS50/30+ACE80/156
350-400kg/h
Triple layers
ASA/PMMA+PVC+PVC
720/920/1100/1130mm
2.0-3.0mm
ASS50/30+ACE65/132+ACE51/105
350-400kg/h
Triple layers
PVC+PVC foamed+PVC
720/920/1100/1130mm
2.0-3.0mm
ACE51/105+ACE65/132+ACE51/105
350-400kg/h
Four layers
ASA/PMMA+PVC+PVC foamed+PVC
720/920/1100/1130mm
2.0-3.0mm
ASS50/30+ACE51/105+ACE65/132+ACE51/105
350-400kg/h
Our service:
In order to provide you the specific proposal, please advise:
Contact to ACEEXTECH:Â
JIANGSU ACEEXTECH MACHINERY CO., LTD
Tel:+86-512 58620105
Fax:+86-512 58620107Â Â Â
Mobile : +86 18021237973
Website:www.aceextech.comÂ
Add:No.18 Yuefeng Road, Nanfeng Town, Zhangjiagang City Jiangsu, China, 215600
Â
PVC Trapezoid Roofing Tile Extruding Line
Model NO.: ACE65/132-80/156
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Cavity: Single Cavity
Extruder Gearbox: High Torque Vertical Type
Gearbox Bearing: NSK, SKF
Motor Brand: Weg, Siemens
Extruder Model: Ace65/132-80/156
Extrusin Speed: 1.0-2.0m/Min
Barrel & Screw: Bimetallic Barrel & Screw
Controller: Siemens PLC
Trademark: ACEEXTECH
Transport Package: Wood Pallet and Film Covered
Specification: 1130mm PVC corrugated roof sheet extrusion line
Origin: China
HS Code: 8477800000
Model NO.: ACE65/132-80/156
Engagement System: Full Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Cavity: Single Cavity
Extruder Gearbox: High Torque Vertical Type
Gearbox Bearing: NSK, SKF
Motor Brand: Weg, Siemens
Extruder Model: Ace65/132-80/156
Extrusin Speed: 1.0-2.0m/Min
Barrel & Screw: Bimetallic Barrel & Screw
Controller: Siemens PLC
Trademark: ACEEXTECH
Transport Package: Wood Pallet and Film Covered
Specification: 1130mm PVC corrugated roof sheet extrusion line
Origin: China
HS Code: 8477800000
PVC trapezoid roofing tile extruding line♦ Specified screw design for better material plasticizing &mixing effect, For high filling formula, bimetallic screw and barrel can guaranteeÂ
♦ Co-extruder equipped with dehumidifying and drying system can be applied to produce PMMA/ASA composite material, which ensures the
♦ T-die adopted hanger style can be applied to produce single PVC melt material or multi-layer compound material, and flow surface adopts
♦ Specified design of Calibrator ensuring faster heating transfer and quickly cooling calibration;
♦ Guillotine cutter ensuing flat and chip free cutting, and tracking cutter especially for thick and high filler product;
♦ Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently♦ Motor: Siemens, WEG, SEW
♦ Gear reducer: SEW, FALK
♦ Bearing: SKF, FAG, NSK
♦ Air cylinder: Festo, SMC, AirTac
♦ PLC interface and module: Siemens, Schneider, Beckhoff
♦ Frequency inverter: ABB, Schneider, Siemens
♦ Servo motor: Lenze, Delta
♦ Pressure sensor: Dynisco, Gefran
♦ Low voltage component: Siemens, Schneider, Omron, LS
♦ Temperature controller: Omron, RKC
♦ Solid state relay: Crydom, Celduc
Ability to provide the customized plastic extrusion solutions;
Turn-key solution is pleased to be provided include plant layout and design, formula, production support etc;
Complete sales system covering the pre-sales, sales and after service jobs;
Professional sales team with local language speaking ability for English, Portuguese, Spanish, Turkish and Russian markets;
Commissioning &Â installation service in customer plant and free training to client labors.
PVC trapezoid roofing tile extruding lineBasic drawing of final product request to be provided;
Output capacity will be need;
Single or co-extrusion?
How many layers will be?
♦ Specified screw design for better material plasticizing &mixing effect, For high filling formula, bimetallic screw and barrel can guaranteeÂ
♦ Co-extruder equipped with dehumidifying and drying system can be applied to produce PMMA/ASA composite material, which ensures the
♦ T-die adopted hanger style can be applied to produce single PVC melt material or multi-layer compound material, and flow surface adopts
♦ Specified design of Calibrator ensuring faster heating transfer and quickly cooling calibration;
♦ Guillotine cutter ensuing flat and chip free cutting, and tracking cutter especially for thick and high filler product;
♦ Intelligent PLC controlling system with human-friendly interface make the operation easily and conveniently♦ Motor: Siemens, WEG, SEW
♦ Gear reducer: SEW, FALK
♦ Bearing: SKF, FAG, NSK
♦ Air cylinder: Festo, SMC, AirTac
♦ PLC interface and module: Siemens, Schneider, Beckhoff
♦ Frequency inverter: ABB, Schneider, Siemens
♦ Servo motor: Lenze, Delta
♦ Pressure sensor: Dynisco, Gefran
♦ Low voltage component: Siemens, Schneider, Omron, LS
♦ Temperature controller: Omron, RKC
♦ Solid state relay: Crydom, Celduc
Ability to provide the customized plastic extrusion solutions;
Turn-key solution is pleased to be provided include plant layout and design, formula, production support etc;
Complete sales system covering the pre-sales, sales and after service jobs;
Professional sales team with local language speaking ability for English, Portuguese, Spanish, Turkish and Russian markets;
Commissioning &Â installation service in customer plant and free training to client labors.
Basic drawing of final product request to be provided;
Output capacity will be need;
Single or co-extrusion?
How many layers will be?