Hose reel irrigation Aquajet 200m Aquajet series are turbine-driven machines designed for fully mechanized and labor-saving irrigation. The main component parts such as turbine, automatic layering mechanism and crop-protecting sprinkler balancing mechanism enjoy the international patents and keep being updated. Aquajet provides the following additional features. Traveling Gun Irrigation System,Traveling Gun Sprinkler Irrigation System,Energy Saving Farmland Sprinkler Irrigation System,Automatic Sprinkler Hose Reel Irrigation Shandong H.T-BAUER Water and Agricultural Machinery & Engineering Co., Ltd. , https://www.ht-bauer.com
Product description
Â
Definition:
PVC cable materials are special pellets that based on PVC resin, added calcium carbonate and other inorganic filler, plasticizers, additives, lubricant additives, etc, after mixing, compounding and extrusion.
Â
Characteristics of product:
1.    High resistance to breakdown strength
2.    Low dielectric loss
3.    Good and stable insulation
4.    Good softness
5.    Good mechanical properties and electric properties
6.    Strong acid and alkali resistance, good chemical stability
Â
Application:
it is suitable for thin plate, wire and cable insulation, seal, etc.
Â
Production line:
Introduction of ATS two-stage compounding line
To produce PVC cable materials, we generally use ATS two-stage compounding line. ATS Two-stage compounding line includes ATE Twin screw extruder, ASE Single screw extruder and down-stream pelletizing system. The first stage is to realize the polymers compounding job, second stage is to extrude the compounds with gentle and lower temperature, then pelletizing through the down-stream cutting system.
About the pelletizing system
Multiple cutting systems also can be adopted in the ATS compounding line. Thanks to the modular design principle, both Instrument control and PLC control are also available to be applied in the ATS electrical controlling system. All the key electrical parts adopt European brands to guarantee the controlling system with significant and stable performance.
To produce PVC cable materials, we usually use the pelletizing system: air-cooling die-face hot cutting. It has the advantage: combine high-speech and strong-compounding of twin-screw extruder with low-speech, low-temperature and weak-shear of single-screw extruder. It is the first choice when produce heat-sensitive or shear-sensitive material.
Â
Production process
1. Measuring feeding machineÂ
2. First stage: twin screw extruderÂ
3. Second stage: single screw extruder
4. Air-cooling die-face hot cuttingÂ
5. Cyclone separatorÂ
6. Air cooling extended vibrating screenÂ
7. Metering packaging weigher
Main technical specification:
Machine size
Screw Diameter
(mm)Screw Speed Max.
(rpm)Motor Power
(Kw)Throughput Rate
(Kg/h)
ATS52/120
ATE52
51.4
600
55
150-300
ASE120
120
85
37
ATS65/150
ATE52
62.4
600
90
300-500
ASE150
150
85
45
ATS75/180
ATE75
71
600
132
500-800
ASE180
180
85
55
ATS95/200
ATE95
93
600
250
800-1500
ASE200
200
85
75
Characteristics of this set of equipment:
1.    Good mixing effect and the temperature control is convenient
2.    Covers a small area and doesn't need large electricity
3.    Raw material mixing and granulating are entirely automatic, human demand is small
4.    High-safety and can reduce raw materials' damage and deterioration
Â
About our service:
PVC Cable Extruder Before-sale Â
1.    Introduce products and applications detain
2.    Recommend suitable solution
3.    Provide with reference information
4.    Offer lab for test    Â
During Manufacturing         Â
1.    Provide with layout and engineering conditions
2.    Inform the project processing status
3.    Offer other documents
 After-sale
 1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information
Why choose us:
1. Lower investment cost for a high quality and durable machine;
2. Low energy consumption with high production output;
3. Overseas installation and training are available;
4. Machine warranty with spares in stocking and in-time delivery;
5. Fast machine delivery and installation: AceRetech produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an AceRetech recycling machine is 60 days.
Product description
Â
Definition:
PVC cable materials are special pellets that based on PVC resin, added calcium carbonate and other inorganic filler, plasticizers, additives, lubricant additives, etc, after mixing, compounding and extrusion.
Â
Characteristics of product:
1.    High resistance to breakdown strength
2.    Low dielectric loss
3.    Good and stable insulation
4.    Good softness
5.    Good mechanical properties and electric properties
6.    Strong acid and alkali resistance, good chemical stability
Â
Application:
it is suitable for thin plate, wire and cable insulation, seal, etc.
Â
Production line:
Introduction of ATS two-stage compounding line
To produce PVC cable materials, we generally use ATS two-stage compounding line. ATS Two-stage compounding line includes ATE Twin screw extruder, ASE Single screw extruder and down-stream pelletizing system. The first stage is to realize the polymers compounding job, second stage is to extrude the compounds with gentle and lower temperature, then pelletizing through the down-stream cutting system.
About the pelletizing system
Multiple cutting systems also can be adopted in the ATS compounding line. Thanks to the modular design principle, both Instrument control and PLC control are also available to be applied in the ATS electrical controlling system. All the key electrical parts adopt European brands to guarantee the controlling system with significant and stable performance.
To produce PVC cable materials, we usually use the pelletizing system: air-cooling die-face hot cutting. It has the advantage: combine high-speech and strong-compounding of twin-screw extruder with low-speech, low-temperature and weak-shear of single-screw extruder. It is the first choice when produce heat-sensitive or shear-sensitive material.
Â
Production process
1. Measuring feeding machineÂ
2. First stage: twin screw extruderÂ
3. Second stage: single screw extruder
4. Air-cooling die-face hot cuttingÂ
5. Cyclone separatorÂ
6. Air cooling extended vibrating screenÂ
7. Metering packaging weigher
Main technical specification:
Machine size
Screw Diameter
(mm)Screw Speed Max.
(rpm)Motor Power
(Kw)Throughput Rate
(Kg/h)
ATS52/120
ATE52
51.4
600
55
150-300
ASE120
120
85
37
ATS65/150
ATE52
62.4
600
90
300-500
ASE150
150
85
45
ATS75/180
ATE75
71
600
132
500-800
ASE180
180
85
55
ATS95/200
ATE95
93
600
250
800-1500
ASE200
200
85
75
Characteristics of this set of equipment:
1.    Good mixing effect and the temperature control is convenient
2.    Covers a small area and doesn't need large electricity
3.    Raw material mixing and granulating are entirely automatic, human demand is small
4.    High-safety and can reduce raw materials' damage and deterioration
Â
About our service:
PVC Cable Extruder Before-sale Â
1.    Introduce products and applications detain
2.    Recommend suitable solution
3.    Provide with reference information
4.    Offer lab for test    Â
During Manufacturing         Â
1.    Provide with layout and engineering conditions
2.    Inform the project processing status
3.    Offer other documents
 After-sale
 1. Provide with installation, commissioning and training
2. Register and record customer information
3. Offer spare parts
4. Provide with necessary technical support for new application
5. Visit customer regularly and correct information
Why choose us:
1. Lower investment cost for a high quality and durable machine;
2. Low energy consumption with high production output;
3. Overseas installation and training are available;
4. Machine warranty with spares in stocking and in-time delivery;
5. Fast machine delivery and installation: AceRetech produces on an average of 10 sets of plastic machines per month and can deliver the machine faster than most manufacturers. The regular delivery time of an AceRetech recycling machine is 60 days.
Two Stage Compounding Extruder for PVC Cable Material
Model NO.: ATS Series
Engagement System: Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Voltage: 380V 50Hz or Customized
Electric Components: ABB,Schneider,Ls,Omron, or Customized
Pelletizing Type: Strand/Die-Face Pelletizing
Capacity Range: 150-1500kg/H
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE, TUV
Origin: Jiangsu Zhangjiagang
HS Code: 8477209000
Model NO.: ATS Series
Engagement System: Intermeshing
Screw Channel Structure: Deep Screw
Exhaust: Exhaust
Automation: Automatic
Computerized: Computerized
Voltage: 380V 50Hz or Customized
Electric Components: ABB,Schneider,Ls,Omron, or Customized
Pelletizing Type: Strand/Die-Face Pelletizing
Capacity Range: 150-1500kg/H
Trademark: ACERETECH
Transport Package: Wooden Pallet
Specification: CE, TUV
Origin: Jiangsu Zhangjiagang
HS Code: 8477209000
Two Stage Compounding Extruder for PVC Cable Material
Two Stage Compounding Extruder for PVC Cable Material