1. The work site should be kept neat and clean, and the work tools should be placed neatly and steadily, placed in an orderly manner, and environmental sanitation should be done well. 2. When the two fitters are working in the tongs at the same time, although there is a safety net in the middle, they should always pay attention to each other to prevent accidents. 3. It is not allowed to use unfamiliar or other faulty machines and tools. 4. Before work, you must wear protective equipment according to the regulations of the factory. 5, in the removal of the scrap iron fitter, use a brush to clean, clear or prohibited by hand directly blowing mouth, so as to hurt the hand hanging or eye injury. 6. When using electrical equipment, strictly observe the operating procedures; if someone is found to have an electric shock, do not panic, and cut off the power supply in time to rescue. 7. When using the drilling machine and the grinder, it is not allowed to wear gloves or wrap the workpiece with cotton yarn to avoid accidents. Second, the use of power tools safe operation requirements: 1. When using portable power tools, you must hold the handle of the tool. You can't use the soft wire to drag the tool to prevent electric leakage or puncture of the skin due to the abrasion of the soft wire, resulting in an accident. 2. The power supply voltage must not exceed ±10% of the voltage specified on the nameplate of the power tool. Otherwise, the power tool may be damaged or the effect may be affected. 3. When using general power tools, wear insulated gloves, rubber shoes or stand on the insulation board to prevent accidents due to electric leakage. 4. The power tool must be measured with a 500v megohmmeter before use. The insulation resistance should be greater than 5MΩ. When not in use, it should be stored in an environment that is dry, clean and free of corrosive gases. Third, the maintenance equipment safety operation requirements: 1. Do not operate the device blindly and start the power supply. 2. Before the equipment is repaired, pay attention to the various safety warning signs and safety instructions and operation instructions nearby. 3. Information equipment security management personnel, consult the equipment operation manual and other related security content. Fourth, the main safety requirements for mechanical maintenance: 1. Identify the signs of possible failures in a timely manner, analyze and judge the causes, formulate maintenance plans, restore the equipment to have functions, improve equipment reliability, and have the conditions for optimal working conditions for a long period of time. 2. To improve or restore its proper function by overhauling and delaying the development of defects in components. 3. Replace the parts and components that cannot be repaired or have failed during the maintenance process. 4. Using new materials, new technologies and new structures to transform the backward parts of the original machinery and equipment to improve and improve equipment performance. 5. Strictly grasp the maintenance process (demolition, washing, repairing, loading, adjusting, and testing), including the occurrence of faults and changes in the size of the parts to be processed, the specification of standard parts, and the change of lubrication specifications. 6. After the work is completed, the tools, measuring tools, fixtures, and equipment should be cleaned and scrubbed, and put back to the original place. 1)The heat exchange station box is detachable to facilitate maintenance and repair of the heat exchange station. Heat Exchange Unit,Domestic Heat Exchange Unit,Heat Transfer Btu,Heat Exchange Units Home Siping Juyuan Hanyang Plate Heat Exchanger Co., Ltd , https://www.tj-heatexchange.com
2)The internal structure is simple and compact, and the overall heat exchange station occupies a small area.
3)The electric control cabinet is integrated on the box body, and the operation panel is outside the container, making operation and control convenient.
Concentrator fitter safety operation procedures
First, the safe operation requirements: