I believe that when you just bought a car, or when you just got a driver's license, the old drivers around you will teach you more or less about their experience. In fact, they are all out of good intentions to help new people, but Many old drivers are based on their own years of driving experience to make judgments, and some are too dependent on experience. The automotive technology is developing. With the continuous improvement of technology and production processes, many of the previous habits are no longer applicable. Xiao Bian today analyzed with everyone what old drivers said that "common sense" is a problem. of. First, the new car should be worn out, running speed and speed can not be too high Nowadays, the progress of car repairing process is very large, the manufacturing precision reaches a new height, the precision of machining is greatly improved, and the cold mills are experienced before leaving the factory. After the new car leaves the factory, the various parts cooperate with each other in a tacit understanding and do not need to deliberately run in. Second, the new car running high speed Just like the above, the mechanical performance of the new car has reached a good working condition and can be used normally. Although the high speed can remove carbon deposits to some extent, the new car does not have carbon deposition. Third, fuel additives are deceptive, just like gasoline First of all, it should be noted that the higher the better the gasoline is, the better the label's main function is to mark the anti-knocking property, which is not related to the quality of the gasoline itself. The additives for direct injection engines are very necessary, not high standard gasoline can be replaced, it should be noted that do not buy fakes. Fourth, the more heavy the car represents good quality, solid materials, open up and stabilize The reason is simple. Today's cars do not hesitate to reduce costs. Lighter weight means lower fuel consumption and better control. The body of lighter and stronger materials is the most ideal. Fifth, we must fully in-situ hot car Now many car manuals have instructions for hot cars, especially the German car, basically do not recommend the original hot car, start as soon as possible after the normal working speed, which is also related to the progress of the current car manufacturing process. At the same time, idle time is also prone to carbon deposition. All in all, it is not recommended that hot cars stay in place for long periods of time. Six, the lower the car air conditioning temperature, the higher the fuel consumption At present, the use of quantitative pumps for household cars is mostly used. The variable air-conditioning pump is simply to increase (decrease) its own compression ratio (variable) and to control the displacement of the air-conditioning pump according to the need to reduce the fuel consumption. The lower the temperature of an automobile air conditioner, the lower its fuel consumption may not be. The old driver is sometimes good-hearted to do bad things. It is recommended that you first encounter the problems and doubts when you first go and look at the instructions for buying a car. Basically, all the questions about your car are explained. The instructions are also The brainchild of the engineers, but frustration is often overlooked by us, because we feel that we all understand that, at the end, it was discovered that the car did not use the correct method for so many years. Solvent extraction is a process to extract the oil from oil bearing materials by means of a solvent. A typical solvent used is hexane, a by-product of petroleum. The solvent extraction plant is designed to extract oil directly from oil seeds containing less than 20% oil, like soybeans, after flaking. Or it extracts oils from pre-pressed or fully pressed cake of seeds containing more than 20% oil like sunflowers, peanuts, cotton seed, palm kernels, canola, copra, castor and a variety of other materials. Vegetable Oil Solvent Extraction Plant Turnkey Project Soybean Oil Solvent Extraction Turnkey Project,Palm Oil Solvent Extraction Turnkey Project,Sunflower Oil Solvent Extraction Turnkey Project,Plant Oil Solvent Extraction Turnkey Project Dingzhou Yongsheng Grain & Oil Machinery Co.,Ltd. , https://www.oilpresschina.com
The purpose of solvent plant extraction is to remove most of the oil contained in the seed. Extraction is conducted on prepared seeds or, as generally occurs in the case of high oil content seeds, the cake obtained from pre-pressing. Solvent extraction consists of a sequence of five operations:
Preparation of seeds for extraction which includes pre-pressing for high oil content seeds.
Extraction of oil from the prepared material with the aid of a food-grade solvent.
Desolventising-toasting of the de-oiled seed/meal, often combined with drying and cooling of the said meal.
Distillation, to remove the solvent from the extracted oil.
Recovery of solvent, which is reused again and again at the extractor level.
Simple in structure with stable performance;
Additional horizontal grid plate prevents the miscella from flowing back into the material cell to ensure the best extraction effect;
The wet meal is discharged by the material discharger which continuously discharges the wet meal onto the wet meal conveyor. This avoids meal bridging, un-uniform wet meal discharging and extends the serviceable life of the wet meal conveyor.
Composed of pre-extraction, extraction and draining sections. There is material turnover in the process of extraction to make the extraction uniform and thorough. Special self-cell solvent spraying ensures the best effect during extraction.
Features of the Solvent Extraction Process
Evaporation takes place in a vacuum for the best oil quality.
Extraction system can process different raw materials.
Solvent recovery system from vent gas is particularly absorbent.
With full energy conservation and repeat utilization, steam consumption is markedly reduced.
Solvent Extraction Plants Supplied by Yongsheng
In order to meet different clients` requirements, we have a wide range of equipment with capacities from 300 kg to 100 metric tons. When refined, oil grades may qualify as Grade 1, Grade 2, Grade 3 or Grade 4. There are two technologies: one is batch, the other is continuous. Normally we adopt batch-type processing for capacities less than 20 t/d. Otherwise the process adopted is semi-continuous or continuous.
We continue to research new equipment. Yongsheng develops equipment designed to be fully automatic, utilizing advanced technology that can be combined according to different clients` requirements. The latest refining equipment consists of many single units and has a self-contained heating system which saves energy since it does not use a boiler. This equipment requires a smaller workspace and costs less. Furthermore, it has a wider range of functions and can be used to produce Grade 1, Grade 2, Grade 3 and Grade 4 oil.