Brief introduction of the power performance of the sewage suction truck The power of the sewage suction truck is mainly assessed by the following three indicators: 1. The maximum speed of the sewer truck: refers to the maximum speed that can be achieved on a good level road surface when the sewer truck is full. 2. The acceleration time of the sewage suction truck: The acceleration time of the sewage suction truck means the acceleration capacity of the sewage suction truck. It has a great influence on the average driving speed. The commonly used start-up acceleration time and overtaking acceleration time indicate the acceleration capability of the sewage suction truck. Acceleration at the start of the start refers to the time taken for the sewer truck to start from either the I or II block, and to gradually change to the predetermined distance or speed after the maximum speed with the maximum acceleration strength (including when the proper shift timing is selected). . It is also useful to accelerate the process curve, that is, the vehicle speed-time curve to fully reflect the acceleration capability. 3. Uphill capacity of sewage suction truck: The maximum slope that the uphill capacity can be overcome by using the lowest gear on a hard road at full speed when the truck is full is called the maximum grade. It represents the size of the maximum traction force of the suction truck. Different types of sewage suction trucks have different requirements for the above three indicators. Cars and passenger cars are more emphasis on the maximum speed and acceleration capacity. Sewage suction trucks and trucks are more strict on the maximum grade. However, regardless of the type of sewage suction truck, it is necessary to have a certain average speed and acceleration capacity for normal driving on the road.
Longlived Stainless Steel Shot is one of the most popular Metal Abrasive with high quality and low price for shot blasting. Meanwhile, 202 Stainless Steel Shot is an very excellent one of them. Sometimes it could also called 202 Stainless Steel Cut Wire Shot or 202 Stainless Steel Shot Conditioned.
Longlived 202 Stainless Steel Shot is made from high quality 202 Stainless Steel.
Chemical Composition (%)
C
Si
Mn
P
S
Ni
Cr
N
0.78
0.76
15
0.032
0.001
4.06
14.36
0.01
Shape: as cut, G1, G2, G3 and G4.
202 Stainless Steel Shot,Sus202 Stainless Steel Shot,Ss202 Stainless Steel Shot,Stainless Steel Shot For Shot Blasting Longlived Metal Products Co ., Ltd , https://www.longlivedmetalproducts.com
Size: 0.25mm-3.0mm Other size also could be customized.