Gamma 99% Purity Medical Oxygen Generator is used to produce oxygen with purity up to 99%. It is the combination of standard 93% purity Oxygen Generator with one oxygen purifier. Detailed parts combination is as below:
Air Compressor
Function: provide
compressed air source for the PSA oxygen generator, the flow and
pressure are to be decided by the desired oxygen flow rate, purity,
outlet pressure. As it is the air source of whole system, the
performance of air compressor has remarkable influence to the whole
oxygen generator system. Air source must be stable, sufficient with
pressure not less than 7.5 bars.
Compressed air treatment part
Function: get rid of
water, oil, impurities in compressed air coming from the air compressor,
providing clean, dry, oil-free compressed air for the PSA oxygen
generation part. It includes 3 filters, 1 refrigerated dryer and 1
activated carbon oil remover. After treatment, dew point of compressed
air can reach -20 degree (normal pressure) , dust content is not larger
than 0.01mg/m3, solid particles diameter is not larger than 0.01μ, oil mist content is not more than 0.003mg/m3.
Air tank
Air tank function:
It quickly increases the pressure of adsorber;
It also stores gas for air compressor, buffers system pressure;
Function:
It is the key part of
whole system. In this part, the oxygen is separated from compressed air,
sent to buffer tank as produced gas. Nitrogen, carbon dioxide,
argon,etc are discharge from muffler as exhausted gases. The efficiency
of this machine is mainly decided by adsorption tower structure, air
distribution structure, molecular molecular sieve performance, process
flow, etc.
O2 buffer tank function:
It balances pressure fluctuation, ensure stable oxygen supply;
With oxygen re-blowing system, the O2 buffer tank can also quickly increases the pressure of adsorption towers.
Function:
To help the performance of oxygen purifier, one oxygen storage tank is supplied.
Function:
This is another key part for the high purity oxygen generator. After its treatment, 99% purity oxygen is achieved.
Oxygen storage tank 2
Function:
After treatment of
oxygen purifier, the 98% purity oxygen has very low pressure, for
getting higher pressure, another oxygen storage tank is supplied.
Function:
As the 99% purity oxygen pressure is very slow, to get 150 bars pressure, one oxygen compressor is needed.
Oxygen filling station
Function
It is used to fill the high pressure oxygen into cylinders for storage or selling.
High purity Medical Oxygen Generator specification:
Oxygen purity: 99%
Oxygen flow rate: 5-100 Nm3/Hr
99% Purity Medical Oxygen Generator 99% Purity Medical Oxygen Generator,Hospital Oxygen Generators,Cylinder Filling Oxygen Generators Shandong Gamma Gas Engineering Co. Ltd. , https://www.gammagas.com
Volvo Penta receives an order for a Volvo Penta IPS engine from a pilot vessel
It is reported that the Volvo Penta engine will be equipped with the Volvo Penta IPS engine for the newly built pilot vessel of the Virginia Pilotage Association.
The 55-foot pilotship, designed by the C. Raymond Hunt Association and built by Gladding-Hearn Shipbuilding, will feature an IPS3-driven engine package with dual D13 900 horsepower to meet US Environmental Protection Agency Tier 3.
Since the Volvo Penta D13 engine combined with the IPS3 drive easily meets the five criteria for stability, reliability, support, navigation and efficiency for the new pilot vessel, it is a power solution.
Compared to conventional shaft-driven engines, the Volvo Penta IPS engine is the perfect solution for modern pilot boats, delivering up to 20% faster speed, 30% lower fuel consumption, 15% faster acceleration and 50% less noise and vibration. .