The use of this system can effectively improve the braking effect, which is said to improve the braking effect by 30%. For the pilot, you don't need to slowly increase the brakes to find the maximum braking force, just use the full brake to be OK, and prevent the puncture. Next, we should talk about motorcycles. The development of ABS is very fast. By 1950, the world's first mass-produced anti-lock system installed on motorcycles appeared. It is Maxaret. The system is similar to the previously mentioned aircraft anti-lock braking system, using the mechanical design of the flywheel, the only improvement is that the system weight is much reduced, just 4.7 pounds. ABS was actually used on motorcycles in 1958, and it has been used on airplanes before. At that time, the British Road Research Laboratory began testing on motorcycles. The conclusion was that the system was very suitable for motorcycles because the two wheels of the motorcycle were very slippery. If the motorcycle uses an anti-lock braking system, the benefits are many, such as reduced braking distance, and the slippery road surface is not so dangerous, which can effectively avoid slipping and other problems. Although this test has a future, it was not immediately used in mass production at the time, and it was only used in some trucks and racing cars and cars. At that time, the British JESEN FF was the first commercially available sports car that listed Maxaret as the standard. It was called the safest sports car in the world. Then ABS has been developed to 1970. After more than ten years of development, ABS has also made great progress and development. Many manufacturers have changed the mechanical ABS into an electronic design. At that time, many cars used electronic ABS, such as Chrysler's Sure Brake, Ford's Sure-Track, and GM's Trackmaster. At that time, NISSAN's EAL (Electro Anti-lock System was the first Japanese manufacturer to make electronic ABS. The use of ABS has been promoted, but it has not been sold as a component. Until 1978, the US BOSCH used ABS as a component to supply and produce. In 1985, BOSCH ABS was selected by American car manufacturers. Since then, ABS has become a safe configuration for major cars. Although the early motorcycles also used ABS, it was only a test car, and the actual mass production of motorcycles used ABS. BMW produced a car called K100, which is equipped with electronic ABS. After that, YAMAHA launched the GTS1000 in 1993, Ho nDA ST1100, etc., all of which are mass-produced with ABS, but because ABS was very heavy at the time, it was used. There is no problem in the car, but the light volume and weight put a great burden on the motorcycle, so if you do not reduce the size and weight, it is difficult to use on a light motorcycle. The development path of ABS is very difficult. After one generation and one generation of replacement, ABS is getting smaller and smaller and lighter and lighter, in order to improve the installation possibility of motorcycles. In 2009, ABS 9M issued by BOSCH is aimed at motorcycles. The micro ABS developed, the early generations of ABS weighs 6kg, but this system is only 700g. This was followed by a new regulation in Europe, which was to force the motorcycle to the ABS system, because European studies at the time showed that the risk of motorcycles was very high, almost ten times that of driving. If ABS was used, the accident rate would be reduced. 60%. Finally, the EU decided that for more than 125cc, the new car models registered in 2016 will be forced to carry ABS, while in 2017, ABS will be fully installed, and the other cars below 125cc will be able to choose ABS or CBS. ABS brings a lot of benefits to the Cavaliers, and the presence of ABS is far more than the braking skills of many people. After all, not all knights have received professional training in brake technology. Have you learned whether ABS knights have expectations for ABS? I suggest that you can choose ABS to choose. If you don't have ABS, you should pay attention to your own speed. Do not step on the bottom of the brakes, in theory, high-speed brakes can also achieve the effect of ABS, but slightly difficult. InnoColor 2K Matte Clear Coat InnoColor, 2K. Matte, Clear Coat WONDER COATING TECHNOLOGY CO., LTD. , https://www.innocolor-paint.com
What is the unknown history of ABS?
What is ABS? This word has been common in the motorcycle industry. In fact, ABS is the brake anti-lock system, which is also the abbreviation of antilock brake system. If we let ABS trace back to 1929, then we will find that the earliest ABS-like equipment was used on the plane. At the time of landing, the aircraft used a purely mechanical anti-deadlock system for deceleration.