Relevant recommendation: S-type digital push-pull gauge Flange-type digital push-pull gauge Spoke-type digital push-pull gauge Built-in digital push-pull gauge
OEM Desulphurization Pump,Desulphurization Pump Parts Shijiazhuang Boda Industrial Pump Co., Ltd. , https://www.mineralslurrypump.com
1. When the test rod is not connected to any test head, the load under test cannot be directly applied to the test rod end.
2. Do not use test heads that are damaged or bent. This will inevitably result in errors.
3. Do not use a digital push-pull force meter to measure the load that exceeds the maximum test load. Otherwise, the elastic force of the load detection mechanism will gradually deteriorate, resulting in the detected load value failing to reach the required accuracy level.
4. Pay attention to the use of the first, before use to detect whether the battery voltage is normal, if under voltage, please charge in time, otherwise the measurement will appear deviation.
5. When internal parts are deteriorated or damaged, we should learn to start preliminary diagnosis and detection from the circuit part, and avoid the problem of line short circuit due to circuit charging or calibration problems.
6. The details of the circuit part include the battery, circuit board, sensor connection line detection, etc. At this time, we need a universal meter to perform the auxiliary work. The use of the universal meter and the operation and learning are also indispensable. I would like to push a digital force meter. The maintenance of users, some of the circuit knowledge that must be understood, and the step-by-step process from the circuit of the ink, are the quicker and more stable solutions to our problems.
Digital push-pull gauge picture 
According to your drawing, we can kindly provide Slurry Pump/spare parts for you.
Our company can machine the imported and domestic Desulphurization Pump, and we can process the parts of Desulphurization Pump if you provide the drawings. The main brands include as follows:
1 KINGDA PUMPS: 600TL.700TL.800TL.900TL.1000TL.AHR.HH.ZGB.SP.SPR.ZJ ALL SERIES
2 WARMAN: 600GSL.700GSL.800GSL.AH.HH ALL SERIES
3 KSB: KWPK600.KWPK800-883.KWPK.KWPN.KWPO.KWPF.KVRE.KVREX ALL SERIES
4 SULZER: ZAP901.WPP700.CZ.ZA.ZA0 PART SERIES
5 ANDRITZ: SP600.SP700.SP800 PART SERIES
6 METSO: SV.LV SERIES,AGITATOR
7 CHEMINEER: AGITATOR
8 LIGHTNIN: MIXERS.VSF SERIES.
The materials include: A49 R66.A51.Cr30A.2605N.1.4529 etc.
Digital push-pull meter regular maintenance basic steps
Digital push-pull gauges regularly maintain the basic steps. This is a blind spot for most users of digital force gauges . Some users think that if they do not carry out maintenance and cleaning, they can save some costs. Only the loss of later higher repair costs, and the loss of the number of push-pull gauge life, will lead to an earlier loss of value, the following is a summary of the basic steps for the regular maintenance of a digital push-pull-force gauge for everyone to organize, hope that everyone helpful: