Needle bar is an important component of a Warp Knitting Machine. It is a long, thin metal bar that holds the needles used to form the knitted fabric. The needle bar is mounted on the machine and moves up and down, allowing the needles to pass through the yarn and create the stitches.
The needle bar is a critical component of the warp knitting machine, and must be carefully maintained to ensure that the needles are properly aligned and functioning correctly. Regular cleaning and lubrication are essential to prevent wear and tear on the needles and the bar itself.
Needle Bar,Stretcher Bars For Punch Needle,Needle Bar Connecting Link,Needle Bar Thread Guide Brother suzhou cotex international Co.,Ltd , https://www.macanol.com
Huarui Cast Steel successfully cast a propeller (material made of nickel-aluminum bronze) with a diameter of 7 meters and a finished product weight of 25 tons. It marks that Huarui Cast Steel officially entered the sunrise industry of propeller manufacturing. At present, Huarui Cast Steel has already possessed the production strength of all large and super large propellers in the international shipping industry, and its ability ranks first in the country.
In addition, after the successful trial of the 5000-ton hydraulic press, Huarui Casting Steel completed a series of forging processes such as forging blanks, upsetting and lengthening after 48 hours of supporting forging operation, and successfully forging 4 pieces. Wind power input shaft. So far, the large forging project of the company's fundraising project has been officially put into trial production.
The company said that Casting Steel Co., Ltd. adheres to the "high value-added, high-tech content, deep processing" products as the leading factor, with the industrialization development direction of steel, iron, copper and forging, facing both domestic and international markets, achieving good and fast. development Goals.
The needle bar typically has a series of holes drilled into it, with each hole holding a single needle. The needles are usually made of steel and have a hooked end that catches the yarn and pulls it through the fabric. The number of needles on the bar can vary depending on the machine and the type of fabric being produced.
In warp knitting machines, the needle bar is typically located above the warp yarns, which are held under tension by a series of guides and rollers. As the needle bar moves up and down, the needles pass through the warp yarns, creating loops that are held in place by the tension of the yarns.
