The introspective method of the sewage suction truck (garbage truck) belt is very simple. First, introspect the tension of the belt. At this time, you can use the thumb to strongly press the belt between the two pulleys. The pressing force is about 10kg. Assuming that the belt is about 10mm, the belt tension is considered suitable. Assuming that the amount of reduction is excessive, the tension of the belt is considered to be insufficient. Assuming that there is almost no reduction in the belt tension, the tension of the belt is considered excessive. In the absence of tension, the belt is slippery. When the tension is too large, it is very easy to damage the bearings of various auxiliary machines. For this purpose, the relevant adjusting nuts or bolts should be loosened and the tension of the belt should be adjusted to the optimum shape. In addition, the maintenance of the sewage suction truck (garbage truck) must also pay attention to the wear of the belt. Old belts are worn out and the contact area between belts and pulleys is drastically reduced. At this time, just press the belt with force and the belt sinks deep into the groove of the pulley. The belt rubber also has an aging problem. If the belt rubber is seriously aged, it must be changed in time. The sewage suction truck ( garbage truck ) engine is the brain of the car. If the engine is bad, it means that a car is useless. Sewage vehicles (garbage trucks) are required to run on the road every day. If they are used for a long time, they may cause wear or aging of the engine belt. Therefore, after a certain period of time, the owner of the vehicle should begin to inspect the belt so as to avoid unnecessary troubles. Suitable for suctioning and discharging of petroleum products with the features of long service life and low replacement frequency.The oil and fuel hose is a high-quality product designed to meet your oil and fuel transfer needs. It is constructed using premium materials to ensure long-lasting performance and maximum durability. Oil And Fuel Hose,Delivery Hose,Petroleum Transfer Hose,Diesel Fuel Transfer Hose Luohe Letone Hydraulic Technology Co., Ltd , https://www.litonghose.com
Sewage truck (garbage truck) engine skin maintenance need to know
Sewage suction trucks (garbage trucks) are defined for engine belt wear and ageing prevention, with rare root belts defined at the front of the machine and each belt bearing primary results. On the proposal machine, various types of auxiliary machines are driven via belt drives, such as the shrinking machines for air conditioners, power steering pumps, and alternators. Assuming that the belt is broken, slippage may occur, which will cause the related auxiliary engine to lose its function, or reduce its function, and then affect the normal operation of the car.