Shanghai Shengxu Electric Co., Ltd. is located in the international metropolis of Shanghai. The company specializes in the design and manufacture of SX-500 three-phase thermal relay calibrators and has independently developed a series of products. The company based on the principle of independent research and development, production and sales, and strive to reduce the cost of various aspects, for the majority of users and dealers to provide the most cost-effective products, widely used in electricity, water conservancy, petroleum, railways, mining, chemical and other industries. Application scope:
Applications
Fuel Gas Hot Blast Stove is widely used for drying, solidifying and heat setting for pharmaceutical industry, chemical industry, foodstuff, textile, dyeing, food, grain processing, automobile industries and so on.
Principle
The fuel is burnt at firebox and the high temperature is produced. The quantity of heat will conduct to heated air through heat exchange device; the air will be discharged through fan after the temperature dropping below 250°C. The air need to be heated is sent to Hot Air Furnace through distribution blower. After absorbed heat to rated value, the air will be sent from hot air vent. When the air temperature reaches the rated upper limit, burner will stop or turn to small fire automatically. When air temperature drops to the rated low limit, burner will burn or turn to big fire automatically. The rate of temperature increase could be adjusted by inlet air valve.
Features
Assorted burning dish produced by Italy. Could select different carrier according to the customer`s requirement, including: diesel oil, coal gas, nature gas, heavy oil etc.
The machine has two kinds of type: straight burns and indirect burns, according to the customer`s requirement.
Offer different spray nozzle and adjustment way according to different temperature.
CHANGZHOU
SULI DRYING EQUIPMENT CO.,LTD.specializing in the production of Mixing
Dryer, Spray Dryer, Granulation Dryer ,Crushing Dryer, 3D Motion Mixer
and V-shaped Mixer.
Hot Air Furnace Hot Air Furnace,Fuel Gas Hot Blast Stove,Chemical Fuel Gas Hot Stove,Food Fuel Gas Hot Air Stove Changzhou Su Li drying equipment Co., Ltd. , http://www.sldrying.com
1, SX-500 three-phase thermal relay calibrator is suitable for various types of low-voltage motor protectors, thermal relay testing.
2. Test whether the motor protector is effectively protected during operation.
3, suitable for the test of the low-voltage motor protection device in the laboratory.
4, suitable for the production of motor protection manufacturers for product quality verification, factory testing and debugging.
5. Applicable to R&D, experiment and teaching in various universities and research institutions.
Features:
1. SX-500 three-phase thermal relay calibrator is suitable for overvoltage, overcurrent, phase loss, unbalance, stall and time testing of single-phase, three-phase thermal relays and various active or passive motor protectors. , It is also possible to test the operating current of the current relay and the operating time of the rated current.
â—† Can output 0-50A or 0-500A current for a long time â—† Three-phase current can be balanced output, with fine-tuning function â—† Three-phase voltage can be balanced output, with fine-tuning function â—† Can synchronously test the thermal relay or thermocouple action time â—† Normally-open, normally-closed contacts are automatically identified. â—† Several check-ups can be connected in series at the same time to improve work efficiency.
SX-500 three-phase thermal relay calibrator technical parameters:
Power input: AC 380/220V 50Hz Three-phase four-wire instrumentation grade: 0.5 output current: 3x50A or 3x500A
Output voltage: ground 3 × 450V
Phase 3×780V
Current 0-50000A can be customized
